2611005673
  • Open Access
  • Article

A Quantum-Deformed Navier–Stokes–Cahn–Hilliard Framework for Interfacial Multiphase Flow in Porous Disk Geometries

  • Rabha W. Ibrahim 1,2

Received: 03 October 2026 | Revised: 09 November 2026 | Accepted: 17 November 2026 | Published: 19 November 2026

Abstract

Purpose: This paper develops a generalized \((q,\tau)\)-deformed multiphase-flow framework for porous disk geometries containing multiple internal solid inclusions. The aim is to extend the single-obstacle deformation idea to a more realistic porous domain where several unsymmetric starlike obstacles interact with a moving fluid–fluid interface. Method: A coupled Navier–Stokes–Cahn–Hilliard system is formulated in the porous fluid region \(\Omega_f^{(N)} = \mathbb{D} \setminus \bigcup_{k=1}^N \overline{\Omega_{s,k}}\). The deformation parameters \(q \in (0,1]\) and \(\tau \ge 0\) are introduced through a multi-obstacle boundary indicator, adaptive viscosity, deformed mobility, and localized boundary-stabilization force. The phase field \(\phi\) is transported by the velocity field u, while the phase gradients feed back into the momentum equation through a deformed interfacial force. Results: Theoretical results show that the porous domain is well defined under explicit containment and disjointness conditions. The localization functions are positive, bounded, and concentrated near the solid inclusions. The deformed viscosity and mobility remain positive and bounded under natural gradient assumptions. The coupled model conserves total phase mass under no-flux and impermeability boundary conditions, and a formal phase-field energy dissipation relation is obtained. Simulations demonstrate that decreasing q and increasing \(\tau\) reduce spurious oscillations, smooth the interface, and localize stabilization near high-gradient regions. Conclusions: The proposed model provides a tunable extension of the classical coupled Navier–Stokes–Cahn–Hilliard formulation. When \(q \to 1\), the deformation terms vanish and the classical model is recovered. The framework is suitable for computational studies of interfacial multiphase flow in porous media, microstructured domains, and bounded complex geometries.

 

References 

  • 1.

    Shokrpour Roudbari, M.; van Brummelen, E.H.; Verhoosel, C.V. A multiscale diffuse-interface model for two-phase flow in porous media. Comput. Fluids 2016, 141, 212–222. https://doi.org/10.1016/j.compfluid.2016.07.006.

  • 2.

    Soltanmohammadi, R.; Iraji, S.; Rodrigues de Almeida, T.; et al. Investigation of pore geometry influence on fluid flow in heterogeneous porous media: A pore-scale study. Energy Geosci. 2024, 5, 100222. https://doi.org/10.1016/j.engeos.2023.100222.

  • 3.

    Iraji, S.; De Almeida, T.R.; Munoz, E.R.; et al. The impact of heterogeneity and pore network characteristics on single and multi-phase fluid propagation in complex porous media: An X-ray computed tomography study. Pet. Sci. 2024, 21, 1719–1738. https://doi.org/10.1016/j.petsci.2024.01.015.

  • 4.

    Nimvari, M.E.; Persoons, T.; Gibbons, M. Pore-scale simulation of two-phase flow in biporous media. Phys. Fluids 2024, 36, 107157. https://doi.org/10.1063/5.0232694.

  • 5.

    Ebadi, M.; Meisenheimer, D.; Wildenschild, D.; et al. Topological evolution: An unexplored aspect of hysteresis for multiphase flow in porous media. Phys. Fluids 2026, 38, 026606. https://doi.org/10.1063/5.0310578.

  • 6.

    Yu, T.; Zhao, J. Resolved CFD-DEM for high-fidelity multiphase flow modeling in porous media of arbitrary geometry. Comput. Methods Appl. Mech. Eng. 2026, 450, 118676. https://doi.org/10.1016/j.cma.2025.118676.

  • 7.

    Mesbah, F.; Siavashi, J.; Sharifi, M. 3D pore-scale digital twin for assessing thermal effects on two-phase flow and relative permeability in Bentheimer sandstone. Int. J. Heat Mass Transf. 2026, 260, 128340. https://doi.org/10.1016/j.ijheatmasstransfer.2026.128340.

  • 8.

    Dhaouadi, F.; Dumbser, M.; Gavrilyuk, S. A first-order hyperbolic reformulation of the Cahn–Hilliard equation. Proc. R. Soc. A Math. Phys. Eng. Sci. 2025, 481, 20240606. https://doi.org/10.1098/rspa.2024.0606.

  • 9.

    Mandolesi, B.; Iandiorio, C.; Belardi, V.G.; et al. Spinodal decomposition-inspired metamaterial: Tailored homogenized elastic properties via the dimensionless Cahn-Hilliard equation. Eur. J. Mech. A Solids 2025, 112, 105615. https://doi.org/10.1016/j.euromechsol.2025.105615.

  • 10.

    Bell-Navas, E.; Portillo, D.; Romero, I. A fully variational numerical method for structural topology optimization based on a Cahn-Hilliard model. Comput. Methods Appl. Mech. Eng. 2025, 445, 118233. https://doi.org/10.1016/j.cma.2025.118233.

  • 11.

    Madan, R.; Bhowmick, S.; Hadji, L.; et al. Limit angular speed analysis of porous functionally graded rotating disk under thermo-mechanical loading. Multidiscip. Model. Mater. Struct. 2023, 19, 311–323. https://doi.org/10.1108/mmms-09-2022-0197.

  • 12.

    Islam, M.; Kumar Sinha, R. A unified framework for the direct discontinuous Galerkin method and its variants for the Cahn-Hilliard equations. Commun. Nonlinear Sci. Numer. Simul. 2026, 160, 109974. https://doi.org/10.1016/j.cnsns.2026.109974.

  • 13.

    Conti, M.; Gatti, S.; Giorgini, A.; et al. On the Cahn-Hilliard equation with nonlinear diffusion: The non-convex case. J. Funct. Anal. 2026, 291, 111599. https://doi.org/10.1016/j.jfa.2026.111599.

  • 14.

    Mehrjoo, H.; Monfared, A.E.F.; Jafari, S.; et al. Simulation of Newtonian and non-Newtonian reactive fluids during the dissolution process in porous media using Lattice Boltzmann method. Int. Commun. Heat Mass Transf. 2026, 170, 110061. https://doi.org/10.1016/j.icheatmasstransfer.2025.110061.

  • 15.

    Zahid, F.; Cunningham, J.A. Review of the Color Gradient Lattice Boltzmann Method for Simulating Multi-Phase Flow in Porous Media: Viscosity, Gradient Calculation, and Fluid Acceleration. Fluids 2025, 10, 128. https://doi.org/10.3390/fluids10050128.

  • 16.

    Molla, M.M. Development and numerical validations of a two-dimensional cumulant-driven thermal lattice Boltzmann method. Results Eng. 2025, 27, 106225. https://doi.org/10.1016/j.rineng.2025.106225.

  • 17.

    Alamian, R.; Nayak, A.K.; Safdari Shadloo, M. CooLBM: A GPU-accelerated collaborative open-source reactive multi-phase/component simulation code via lattice Boltzmann method. Comput. Phys. Commun. 2025, 315, 109711. https://doi.org/10.1016/j.cpc.2025.109711.

  • 18.

    Asaei, A.; Siavashi, M.; Hosseini, M.; et al. Pore-scale simulation of hydrogen adsorption in a metal-organic framework (MOF-5) using lattice Boltzmann method. Int. J. Hydrogen Energy 2025, 168, 151147. https://doi.org/10.1016/j.ijhydene.2025.151147.

  • 19.

    Ibrahim, R.W.; Baleanu, D.; Salahshour, S. Integrating Experimental Imaging and (Quantum-Deformation)-Curvature Dynamics in Bleb Morphogenesis. Eng. Rep. 2026, 8, e70726. https://doi.org/10.1002/eng2.70726.

  • 20.

    Ibrahim, R.W.; Baleanu, D. (Quantum, Deformed)-Fractional Complex Steps: Theory, Entropy Analysis, and Imaging Applications. J. Appl. Anal. Comput. 2026, 16, 2639–2667. https://doi.org/10.11948/20250379.

  • 21.

    Ibrahim, R.W.; Baleanu, D.; Salahshour, S. Weighted Deformed Gram Matrices for Quantum-Inspired Learning with Applications to Biomedical Signal Analysis. Eng. Rep. 2026, 8, e70855. https://doi.org/10.1002/eng2.70855.

Share this article:
How to Cite
Ibrahim, R. W. A Quantum-Deformed Navier–Stokes–Cahn–Hilliard Framework for Interfacial Multiphase Flow in Porous Disk Geometries. Journal of Applied Mathematics, Mechanics and Engineering 2026, 1 (1), 5.
RIS
BibTex
Copyright & License
article copyright Image
Copyright (c) 2026 by the authors.
Article Metrics
22
Article Views
0
Citations