JIMME/
Editorial Board

Editorial Board

  • Editor-in-Chief

    • Prof.  Lawrence E. Murr

      • 1. Department of Metallurgical, Materials and Biomedical Engineering, University of Texas at El Paso, El Paso, TX, USA.
      • 2. W.M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, TX, USA.
      Research Interests:
      materials science and engineering; additive manufacturing/3D printing; biomaterials and biomedical applications.
      avatar img

  • Deputy Editor-in-Chief

    • Dr.  Francisco Medina

      • 1. Aerospace and Mechanical Engineering Department, University of Texas at El Paso, El Paso, TX, USA.
      • 2. W.M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, TX, USA.
      Research Interests:
      additive manufacturing; materials qualification; process optimization; design for additive manufacturing (DfAM); advanced alloys/high-Ttemperature alloys; defense readiness; am education.
      avatar img

  • Editorial Board Members

    • Prof.  Kun Li

      College of Mechanical and Vehicle Engineering, Chongqing University, Chongqing, 400044, China.

      Research Interests:
      3D Printing; additive manufacturing; laser manufacturing ICME Design Materials Genome Engineering.
      avatar img

    • Prof.  Nirupam Chakraborti

      Department of Mechanics, Biomechanics and Mechatronics, Faculty of Mechanical Engineering, Czech Technical University in Prague, Prague, Czech Republic.

      Research Interests:
      machine learning;  genetic and evolutionary algorithms; multi-objective optimization; computational materials science.
      avatar img

    • Prof.  Shujun Li

      Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China.

      Research Interests:
      additive manufacturing; porous materials; fatigue; mechanical properties; biomedical materials; composites.
      avatar img

    • Prof.  Reza Mahmudi

      School of Metallurgical and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran.

      Research Interests:
      Mg alloys; creep; superplasticity; severe plastic deformation; ultrafine-grained materials; small-scale mechanical testing.
      avatar img

    • Prof.  Sammy Tin

      Department of Materials Science and Engineering, University of Arizona, Tucson, AZ 85721, USA.

      Research Interests:
      physical metallurgy; superalloys; microstructure characterization; creep and fatigue.
      avatar img

    • Dr.  Efrain Almanza-Casas

      Tecnologico Nacional de Mexico/Instituto Tecnologico de Saltillo, Saltillo, Mexico.

      Research Interests:
      failure analysis; corrosion; characterization of ferrous and non-ferrous alloys.
      avatar img

    • Assist. Prof.  Xipeng Tan

      Department of Mechanical Engineering & Department of Materials Science and Engineering, College of Design and Engineering, National University of Singapore, Singapore, Singapore.

      Research Interests:
      advanced metallurgy & manufacturing; microstructure engineering; high-performance metal additive manufacturing; correlative microscopy (DIC + EBSD + TEM + APT) & machine learning for understanding process-microstructure-property relationships; high-throughput materials discovery and development; tribology.
      avatar img

    • Dr.  Erika V. Esquivel

      Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM, USA.

      Research Interests:
      refractory powder metallurgy; radiation damage.
      avatar img

    • Prof.  Bahattin Koc

      Faculty of Engineering and Natural Sciences, Sabancı University, Istanbul, Türkiye.

      Research Interests:
      additive manufacturing; bioprinting; computational modeling; multifunctional/multimaterial additive manufacturing.
      avatar img

    • Dr.  Patrícia Freitas Rodrigues

      CEMMPRE/ARISE – Department of Mechanical Engineering, University of Coimbra, Coimbra, Portugal.

      Research Interests:
      additive manufacturing; metallic functional materials; shape memory alloys; modified alloys and sustainability.
      avatar img

    • Dr.  Tingting Song

      Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Australia.

      Research Interests:
      additive manufacturing; ti alloys; nanoporous metals.
      avatar img

    • Prof.  Devesh Misra

      • 1. Dean of College of Engineering, Lawrence Technological University, Southfield, MI, USA.
      • 2. Department of Biomedical Engineering and Department of Mechanical, Robotics, and Industrial Engineering, Lawrence Technological University, Southfield, MI, USA.
      Research Interests:
      materials processing; additive manufacturing; structure-property relationship in materials; biomaterials; nanostructured materials.
      avatar img

    • Prof.  Noe Alba-Baena

      Department of Industrial and Menufacturing Engineering, Universidad Autonoma de Ciudad Juarez, Ciudad Juarez, Mexico.

      Research Interests:
      nanocomposites.
      avatar img

    • Dr.  K. P. Misra

      Department of Physics, Manipal University Jaipur, Jaipur, India.

      Research Interests:
      oxide semiconductors; band gap engineering; nanomaterials; additive manufacturing; high entropy alloys; bioactive glasses.
      avatar img

    • Dr.  Karl Davidson

      John de Laeter Centre (JdLC), Curtin University, Perth, Australia.

      Research Interests:
      additive manufacturing; heterogeneous structures; microstructure control; alloy design; magnetic property analysis; bioinspired structures.
      avatar img

    • Dr.  Amlan Kar

      Arbegast Materials Processing and Joining (AMP) laboratory, South Dakota School of Mines and Technology, Rapid City, SD, USA.

      Research Interests:
      additive manufacturing; friction stir welding and processing; hybrid additive processing; sheet metal forming; materials characterization; machine learning.
      avatar img

    • Dr.  Aufa Adlia Nazari

      Faculty of Mechanical Engineering and Technology, Silesian University of Technology, Gliwice, Poland.

      Research Interests:
      additive manufacturing; selective laser melting; biomaterials; metal implants; microstructure property relationships; materials characterization; in vitro study.
      avatar img

    • Prof.  Takayoshi Nakano

      Biomaterials & Structural Materials Design Area, Course of Materials Science & Engineering, Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, Osaka, 565-0871, Japan.

      Research Interests:
      crystallography and plasticity; biomaterials science; anisotropic materials design; heat-resistant structural materials; additive manufacturing; control of crystallographic texture; bone matrix microstructure.
      avatar img

    • Prof.  Konda Gokuldoss Prashanth

      Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Tallinn, Estonia.

      Research Interests:
      additive manufacturing; powder metallurgy; physical metallurgy; metastable materials and processes; materials joining; Solidification.
      avatar img

    • Dr.  Saleem M

      Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram, India.

      Research Interests:
      materials characterization; composite materials; natural fibers; fracture mechanics; impact testing; sustainable manufacturing.
      avatar img

    • Prof.  A. Costa e Silva

      Escola de Engenharia Industrial Metalúrgica, Universidade Federal Fluminense, Volta Redonda, Brazil.

      Research Interests:
      computational thermodynamics applied to steel processing and development.
      avatar img

    • Dr.  Parnika Shrivastava

      Department of Mechanical Engineering, National Institute of Technology Jalandhar, Punjab, India.

      Research Interests:
      advanced forming; design-driven hybrid manufacturing; 3D printing; crystallographic texture; biomedical device design.
      avatar img

    • Assist. Prof.  Xuan Liang

      School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore.

      Research Interests:
      smart manufacturing; additive manufacturing; design optimization; metamaterials; industrial AI; machine learning.
      avatar img

    • Assist. Prof.  Liang Zhu

      College of Mechanical and Vehicle Engineering, Chongqing University, Chongqing, China.

      Research Interests:
      additive manufacturing; lightweight alloy; aluminum alloy; titanium alloy; multi-material additive manufacturing; hybrid additive manufacturing.
      avatar img

    • Assist. Prof.  César A. Terrazas-Nájera

      Aerospace and Mechanical Engineering Department, University of Texas at El Paso, El Paso, TX, USA.

      Research Interests:
      characterization; multi-material components; additive manufacturing; process monitoring and control; qualification.
      avatar img

    • Dr.  Mohamed Bak Kamaludeen

      Department of Mechanical Engineering, School of Mechanical Sciences, B.S Abdur Rahman Crescent Institute of Science and Technology, Chennai, India.

      Research Interests:
      composite materials; materials characterization; design and structures; non destructive testing.
      avatar img