The tribological behavior of composite materials represents a crucial research domain in modern engineering due to the decisive impact of friction, wear, and surface interactions on operational performance. This study evaluates the material and operating-condition-dependent parameters that dictate the tribological response of composite materials, alongside their predominant wear mechanisms. A comprehensive synthesis of the literature demonstrates that matrix and reinforcement types, filler fraction, fiber orientation, surface topography, interfacial bonding strength, applied load, sliding velocity, and operating temperature significantly govern both the coefficient of friction and wear characteristics. While fiber reinforcement substantially enhances wear resistance when paired with strong interfacial adhesion, weak interfacial bonding accelerates failure mechanisms such as delamination and matrix/particle debonding. Depending on the operational conditions, composites exhibit competing wear mechanisms, including abrasive, adhesive, fatigue, and tribochemical wear. Furthermore, surface engineering strategies such as protective coatings, surface texturing, thermal treatments, and advanced lubrication effectively optimize tribological performance. Notably, hybrid composites incorporating solid lubricant additives demonstrate exceptional potential in minimizing friction and retarding wear rates. Integrating standard empirical testing (e.g., pin-on-disk and block-on-ring) with numerical simulations, finite element analysis (FEA), and artificial intelligence (AI)-assisted modeling offers a robust framework for enhancing design reliability. Overall, achieving optimal tribological performance in composite materials necessitates a holistic design approach that synergizes intrinsic material selection, tailored surface engineering, and operational constraints.
- Open Access
- Article
Systematic Analysis and Design Approach for Tribological Behavior in Composite Materials
Author Information
Received: 11 August 2026 | Revised: 28 September 2026 | Accepted: 15 October 2026 | Published: 30 October 2026
Abstract
Keywords
composite materials | tribological behavior | wear mechanisms | fiber-reinforced composites | surface engineering | hybrid composites
References
- 1.
Callister, W.D.; Rethwisch, D.G. Materials Science and Engineering: An Introduction, 10th ed.; John Wiley & Sons: Hoboken, NJ, USA, 2018.
- 2.
Ashby, M.F.; Cebon, D. Materials selection in mechanical design. Le J. de Phys. IV 1993, 3, C7–1–C7–9. https://doi.org/10.1051/jp4:1993701.
- 3.
Friedrich, K. Polymer composites for tribological applications. Adv. Ind. Eng. Polym. Res. 2018, 1, 3–39. https://doi.org/10.1016/j.aiepr.2018.05.001.
- 4.
Hayajneh, M.T.; Al-Shrida, M.A.M.; AL-Oqla, F.M. Mechanical, thermal, and tribological characterization of bio-polymeric composites: A comprehensive review. e-Polym 2022, 22, 641–663. https://doi.org/10.1515/epoly-2022-0062.
- 5.
Milosevic, M.; Valášek, P.; Ruggiero, A. Tribology of Natural Fibers Composite Materials: An Overview. Lubricants 2020, 8, 42. https://doi.org/10.3390/lubricants8040042.
- 6.
Holmberg, K.; Erdemir, A. Influence of tribology on global energy consumption, costs and emissions. Friction 2017, 5, 263–284. https://doi.org/10.1007/s40544-017-0183-5.
- 7.
Stachowiak, G.; Batchelor, A.W. Engineering Tribology; Butterworth-Heinemann: Oxford, UK, 2025.
- 8.
Kim, J.K.; Mai, Y.W. Engineered Interfaces in Fiber Reinforced Composites; Elsevier: Amsterdam, The Netherlands, 1998.
- 9.
Birleanu, C.; Udroiu, R.; Cioaza, M.; et al. The Effect of Fiber Weight Fraction on Tribological Behavior for Glass Fiber Reinforced Polymer. Polymers 2025, 17, 720. https://doi.org/10.3390/polym17060720.
- 10.
Chen, S.; Lin, J.; Wang, J.; et al. Enhanced wear resistance of natural rubber via plasma-induced hybrid filler network of pyrolysis carbon black and carbon nanotubes. Polymer 2026, 356, 130072. https://doi.org/10.1016/j.polymer.2026.130072.
- 11.
Li, W.; Li, Z.; Zhang, Z. Tribological behavior of the carbon fiber-reinforced epoxy resin matrix composite with orderly arranged carbon nanotubes. Tribol. Int. 2025, 201, 110246. https://doi.org/10.1016/j.triboint.2024.110246.
- 12.
Surya, M.S.; Srivastava, J.P.; Maddula, S.P. Effect of nano-reinforcement particles on mechanical and tribological characteristics of composite materials: An in-depth review. J. Bio-Tribo-Corros. 2026, 12, 9.
- 13.
Zhao, Y.; Pei, X.; Lin, L. Effect of third-body patches on the tribological performance of a polyetheretherketone (PEEK) hybrid composite and steel sliding system. Wear 2025, 584–585, 206388. https://doi.org/10.1016/j.wear.2025.206388.
- 14.
Xu, Y.; Zhao, S.; Hua, C.; et al. Tribological anisotropy of 3D-printed PEEK composites: Effects of fiber orientation and multi-scale particle reinforcement. Tribol. Int. 2026, 222, 112099. https://doi.org/10.1016/j.triboint.2026.112099.
- 15.
Hutchings, I.; Shipway, P. Tribology: Friction and Wear of Engineering Materials; Butterworth-Heinemann: Oxford, UK, 2017.
- 16.
Yin, N.; Yang, P.; Liu, S.; et al. AI for tribology: Present and future. Friction 2024, 12, 1060–1097. https://doi.org/10.1007/s40544-024-0879-2.
- 17.
Matthews, F.L.; Rawlings, R.D. Composite Materials: Engineering and Science; Woodhead Publishing: Cambridge, UK, 1999.
- 18.
Mertgenç Yoldaş, D. Investigation of Diffusion Induced Fiber–Matrix Interface Damages in Adhesively Bonded Polymer Composites. Polymers 2025, 17, 1672. https://doi.org/10.3390/polym17121672.
- 19.
Chong, W.W.F.; De la Cruz, M. Elastoplastic contact of rough surfaces: A line contact model for boundary regime of lubrication. Meccanica 2014, 49, 1177–1191. https://doi.org/10.1007/s11012-013-9861-1.
- 20.
Blau, P.J. Friction Science and Technology: From Concepts to Applications, 2nd ed.; CRC Press: Boca Raton, FL, USA, 2008.
- 21.
Zum Gahr, K.H. Microstructure and Wear of Materials; Elsevier: Amsterdam, The Netherlands, 1987; Volume 10.
- 22.
Hamrock, B.J.; Schmid, S.R.; Jacobson, B.O. Fundamentals of Fluid Film Lubrication; CRC Press: Boca Raton, FL, USA, 2004. https://doi.org/10.1201/9780203021187.
- 23.
Bowden, F.P.; Tabor, D. The Friction and Lubrication of Solids; Oxford University Press: Oxford, UK, 2001.
- 24.
Godet, M. The third-body approach: A mechanical view of wear. Wear 1984, 100, 437–452. https://doi.org/10.1016/0043-1648(84)90025-5.
- 25.
Williams, J.A. Engineering Tribology; Cambridge University Press: Cambridge, UK, 2005.
- 26.
Czichos, H. Tribology: A Systems Approach to the Science and Technology of Friction, Lubrication, and Wear; Elsevier: Amsterdam, The Netherlands, 2009.
- 27.
Okoani, A.O.; Nand, A.; Jiang, C.P.; et al. Investigating the Tribocorrosion Behaviour of NiTiNOL60 Alloy in Engineering and Biomedical Applications—An Overview. Metals 2024, 14, 1334. https://doi.org/10.3390/met14121334.
- 28.
Lim, S.C. Recent developments in wear-mechanism maps. Tribol. Int. 1998, 31, 87–97. https://doi.org/10.1016/s0301-679x(98)00011-5.
- 29.
Swain, B.; Bhuyan, S.; Behera, R.; et al. Wear: A Serious Problem in. In Tribology in Materials and Manufacturing: Wear, Friction and Lubrication; Intechopen: London, UK, 2021; pp. 279.
- 30.
Suresh, S. Fatigue of Materials; Cambridge University Press: Cambridge, UK, 1998.
- 31.
Fontana, M.G. Corrosion Engineering, 3rd ed.; McGraw-Hill: New York, NY, USA, 1986.
- 32.
Johnson, K.L. Contact Mechanics; Cambridge University Press: Cambridge, UK, 1987.
- 33.
Bhushan, B. Principles and Applications to Tribology; John Wiley & Sons, Ltd.: Chichester, UK, 2013. https://doi.org/10.1002/9781118403020.
- 34.
Savage, G. Carbon-Carbon Composites; Chapman & Hall: London, UK, 1993.
- 35.
An, Q.; Zhang, J.; Xiao, G.; et al. Fiber Orientation Effects in CFRP Milling: Multiscale Characterization of Cutting Dynamics, Surface Integrity, and Damage Mechanisms. J. Compos. Sci. 2025, 9, 342. https://doi.org/10.3390/jcs9070342.
- 36.
Ajayan, P.M.; Schadler, L.S.; Braun, P.V. Nanocomposite Science and Technology; John Wiley & Sons: Hoboken, NJ, USA, 2006.
- 37.
Nelon, C.; Myers, O.; Hall, A. The intersection of damage evaluation of fiber-reinforced composite materials with machine learning: A review. J. Compos. Mater. 2022, 56, 1417–1452. https://doi.org/10.1177/00219983221077755.
- 38.
Holmberg, K.; Matthews, A. Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering; Elsevier: Amsterdam, The Netherlands, 2009.
- 39.
Chawla, K.K. Ceramic Matrix Composites, 2nd ed.; Springer: Berlin/Heidelberg, Germany, 2013.
- 40.
Clyne, T.W.; Hull, D. An Introduction to Composite Materials; Cambridge University Press: Cambridge, UK, 2019.
- 41.
Geim, A.K. Graphene: Status and Prospects. Science 2009, 324, 1530–1534. https://doi.org/10.1126/science.1158877.
- 42.
Kim, J.K.; Mai, Y.W. Interface Engineering of Composite Materials; Elsevier: Amsterdam, The Netherlands, 2011.
- 43.
Levy, A.V. Solid Particle Erosion and Erosion-Corrosion of Materials; ASM International: Almere, The Netherlands, 1995.
- 44.
Mallick, P.K. Fiber-Reinforced Composites: Materials, Manufacturing, and Design, 3rd ed.; CRC Press: Boca Raton, FL, USA, 2007.
- 45.
Miracle, D.B., Donaldson, S.L. (Eds.) Composites. In ASM Handbook; ASM International: Almere, The Netherlands, 2008; Volume 21.
- 46.
Mukhopadhyay, M. Mechanics of Composite Materials and Structures; Universities Press: Hyderabad, India, 2005.
- 47.
Zhang, S. (Ed.) Tribology of Polymeric Nanocomposites; Elsevier: Amsterdam, The Netherlands, 2015.
This work is licensed under a Creative Commons Attribution 4.0 International License.
