PCM/
Articles/
2610005471
  • Open Access
  • Article

Hierarchical Composites with Carbon Nanotube Grafted Carbon Fibers: A Critical Assessment

  • Mukul K. Srivastava 1,   
  • Himanshu Gupta 2,   
  • Nandini Gupta  2,   
  • Sumit Basu 1,* and 
  • Prabhat K. Agnihotri 3

Received: 02 October 2026 | Revised: 19 October 2026 | Accepted: 22 October 2026 | Published: 03 November 2026

Abstract

Carbon fiber reinforced polymer (CFRP) composites are engineered, synthetic materials of choice for an extensive range of applications, primarily in aerospace, automotive, wind turbine, and sports industries. Identifying viable technological pathways for increasing the range of properties that CFRPs currently offer might considerably widen the scope of their use. Hierarchical composites are made up of ‘fuzzy fibers’ or fibers that have been grafted with multiwalled carbon nanotubes. Apart from the important distinction that hierarchical composites use fuzzy fibers as reinforcement, they are similar to conventional CFRP composites in terms of manufacturing processes and resin system. Fuzzy fibers are synthesised through a variety of processes but the processing route involving high temperature chemical vapour deposition (CVD) is the most popular. We assess the possibility of using hierarchical composites synthesised via the CVD route as a replacement for conventional composites in situations that demand multi-functionality. This is motivated by the fact that improvements in Mode I and II fracture toughness and interlaminar shear strength without any loss of overall strength and stiffness is widely reported for hierarchical composites. Additionally, improvements in electrical properties, shielding to electromagnetic waves and thermal conductivity are also reported. We highlight the process-property relations in hierachical composites, attempt to identify the key process parameters and highlight the range of mechanical, thermal and electrical properties that have been obtained in our laboratory and by others. Finally, we attempt to identify area where hierarchical composites are most likely to find use as a versatile material.

References 

  • 1.

    Zhang, J.; Lin, G.; Vaidya, U.; et al. Past, present and future prospective of global carbon fibre composite developments and applications. Compos. Part B Eng. 2023, 250, 110463. https://doi.org/10.1016/j.compositesb.2022.110463.

  • 2.

    Kizaki, T.; Zhang, J.; Yao, Q.; et al. Continuous manufacturing of CFRP sheets by rolling for rapid fabrication of long CFRP products. Compos. Part B Eng. 2020, 189, 107896. https://doi.org/10.1016/j.compositesb.2020.107896.

  • 3.

    Achim, V.; Ruiz, E. Guiding selection for reduced process development time in RTM. Int. J. Mater. Form. 2010, 3(Suppl. 2), 1277–1286. https://doi.org/10.1007/s12289-009-0630-6.

  • 4.

    Sahu, R.; Ponnusami, S.A.; Weimer, C.; et al. Interface engineering of carbon fiber composites using CNT: A review. Polym. Compos. 2024, 45, 9–42. https://doi.org/10.1002/pc.27772.

  • 5.

    Zhao, Z.; Teng, K.; Li, N.; et al. Mechanical, thermal and interfacial performances of carbon fiber reinforced composites flavored by carbon nanotube in matrix/interface. Compos. Struct. 2017, 159, 761–772. https://doi.org/10.1016/j.compstruct.2016.10.022.

  • 6.

    Pozegic, T.R.; Anguita, J.V.; Hamerton, I.; et al. Multi-Functional Carbon Fibre Composites using Carbon Nanotubes as an Alternative to Polymer Sizing. Sci. Rep. 2016, 6, 37334. https://doi.org/10.1038/srep37334.

  • 7.

    Kandare, E.; Khatibi, A.A.; Yoo, S.; et al. Improving the through-thickness thermal and electrical conductivity of carbon fibre/epoxy laminates by exploiting synergy between graphene and silver nano-inclusions. Compos. Part A Appl. Sci. Manuf. 2015, 69, 72–82. https://doi.org/10.1016/j.compositesa.2014.10.024.

  • 8.

    Hao, M.; Qian, X.; Zhang, Y.; et al. Thermal conductivity enhancement of carbon fiber/epoxy composites via constructing three-dimensionally aligned hybrid thermal conductive structures on fiber surfaces. Compos. Sci. Technol. 2023, 231, 109800. https://doi.org/10.1016/j.compscitech.2022.109800.

  • 9.

    Sung, D.H.; Kim, M.; Park, Y.B. Prediction of thermal conductivities of carbon-containing fiber-reinforced and multiscale hybrid composites. Compos. Part B Eng. 2018, 133, 232–239. https://doi.org/10.1016/j.compositesb.2017.09.032.

  • 10.

    Qian, H.; Bismarck, A.; Greenhalgh, E.S.; et al. Hierarchical Composites Reinforced with Carbon Nanotube Grafted Fibers: The Potential Assessed at the Single Fiber Level. Chem. Mater. 2008, 20, 1862–1869. https://doi.org/10.1021/cm702782j.

  • 11.

    Qian, H.; Greenhalgh, E.S.; Shaffer, M.S.P.; et al. Carbon nanotube-based hierarchical composites: A review. J. Mater. Chem. 2010, 20, 4751–4762. https://doi.org/10.1039/c000041h.

  • 12.

    Downs, W.B.; Baker, R.T.K. Novel carbon fiber-carbon filament structures. Carbon 1991, 29, 1173–1179. https://doi.org/10.1016/0008-6223(91)90035-h.

  • 13.

    Downs, W.B.; Baker, R.T.K. Modification of the surface properties of carbon fibers via the catalytic growth of carbon nanofibers. J. Mater. Res. 1995, 10, 625–633. https://doi.org/10.1557/jmr.1995.0625.

  • 14.

    Thostenson, E.T.; Li, W.Z.; Wang, D.Z.; et al. Carbon nanotube/carbon fiber hybrid multiscale composites. J. Appl. Phys. 2002, 91, 6034–6037. https://doi.org/10.1063/1.1466880.

  • 15.

    Ou, Y.; Wu, L.; Mao, D. Hierarchical mode I interlaminar toughening of unidirectional CFRP laminates by the synergistic effects of CNT powders and veils. Compos. Part A Appl. Sci. Manuf. 2023, 168, 107464. https://doi.org/10.1016/j.compositesa.2023.107464.

  • 16.

    Reynaud, E.; Gauthier, C.; Perez, J. Nanophases in polymers. Rev. Métall. 1999, 96, 169–176. https://doi.org/10.1051/metal/199996020169.

  • 17.

    Winey, K.I.; Vaia, R.A. Polymer Nanocomposites. MRS Bull. 2007, 32, 314–322. https://doi.org/10.1557/mrs2007.229.

  • 18.

    Pandey, J.C.; Gupta, N. Estimation of interphase thickness of epoxy-based nanocomposites. IEEE Trans. Dielectr. Electr. Insul. 2016, 23, 2747–2756. https://doi.org/10.1109/tdei.2016.7736834.

  • 19.

    Yuan, X.; Zhu, B.; Cai, X.; et al. Nanoscale toughening of carbon fiber-reinforced epoxy composites through different surface treatments. Polym. Eng. Sci. 2019, 59, 625–632. https://doi.org/10.1002/pen.24978.

  • 20.

    Gojny, F.; Wichmann, M.; Fiedler, B.; et al. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites—A comparative study. Compos. Sci. Technol. 2005, 65, 2300–2313. https://doi.org/10.1016/j.compscitech.2005.04.021.

  • 21.

    Hernández-Pérez, A.; Avilés, F.; May-Pat, A.; et al. Effective properties of multiwalled carbon nanotube/epoxy composites using two different tubes. Compos. Sci. Technol. 2008, 68, 1422–1431. https://doi.org/10.1016/j.compscitech.2007.11.001.

  • 22.

    Tang, L.C.; Zhang, H.; Han, J.H.; et al. Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes. Compos. Sci. Technol. 2011, 72, 7–13. https://doi.org/10.1016/j.compscitech.2011.07.016.

  • 23.

    Gupta, H.; Srivastava, M.; Agnihotri, P.K.; et al. A Critical Assessment of Electrical Conductivity and Multifunctionality of MWCNT/Epoxy Nanocomposites. IEEE Trans. Dielectr. Electr. Insul. 2025, 32, 1324–1332. https://doi.org/10.1109/tdei.2025.3562536.

  • 24.

    Steiner, S.A.; Li, R.; Wardle, B.L. Circumventing the Mechanochemical Origins of Strength Loss in the Synthesis of Hierarchical Carbon Fibers. ACS Appl. Mater. Interfaces 2013, 5, 4892–4903. https://doi.org/10.1021/am4006385.

  • 25.

    Gangineni, P.K.; Yandrapu, S.; Ghosh, S.K.; et al. Mechanical behavior of graphene decorated carbon fiber reinforced polymer composites: An assessment of the influence of functional groups. Compos. Part A Appl. Sci. Manuf. 2019, 122, 36–44. https://doi.org/10.1016/j.compositesa.2019.04.017.

  • 26.

    He, P.; Huang, B.; Liu, L.; et al. Preparation of multiscale graphene oxide-carbon fabric and its effect on mechanical properties of hierarchical epoxy resin composite. Polym. Compos. 2016, 37, 1515–1522. https://doi.org/10.1002/pc.23321.

  • 27.

    Jiang, J.; Yao, X.; Xu, C.; et al. Influence of electrochemical oxidation of carbon fiber on the mechanical properties of carbon fiber/graphene oxide/epoxy composites. Compos. Part A Appl. Sci. Manuf. 2017, 95, 248–256. https://doi.org/10.1016/j.compositesa.2017.02.004.

  • 28.

    Deng, C.; Jiang, J.; Liu, F.; et al. Influence of surface properties of graphene oxide/carbon fiber hybrid fiber by oxidative treatments combined with electrophoretic deposition. Surf. Interface Anal. 2016, 48, 212–217. https://doi.org/10.1002/sia.5944.

  • 29.

    Gong, S.; Zhu, Z.H.; Arjmand, M.; et al. Effect of carbon nanotubes on electromagnetic interference shielding of carbon fiber reinforced polymer composites. Polym. Compos. 2018, 39, E655–E663. https://doi.org/10.1002/pc.24084.

  • 30.

    Davis, D.C.; Wilkerson, J.W.; Zhu, J.; et al. Improvements in mechanical properties of a carbon fiber epoxy composite using nanotube science and technology. Compos. Struct. 2010, 92, 2653–2662. https://doi.org/10.1016/j.compstruct.2010.03.019.

  • 31.

    Zhang, Q.; Liu, J.; Sager, R.; et al. Hierarchical composites of carbon nanotubes on carbon fiber: Influence of growth condition on fiber tensile properties. Compos. Sci. Technol. 2009, 69, 594–601. https://doi.org/10.1016/j.compscitech.2008.12.002.

  • 32.

    De Greef, N.; Zhang, L.; Magrez, A.; et al. Direct growth of carbon nanotubes on carbon fibers: Effect of the CVD parameters on the degradation of mechanical properties of carbon fibers. Diam. Relat. Mater. 2015, 51, 39–48. https://doi.org/10.1016/j.diamond.2014.11.002.

  • 33.

    Zhang, W.; Deng, X.; Sui, G.; et al. Improving interfacial and mechanical properties of carbon nanotube-sized carbon fiber/epoxy composites. Carbon 2019, 145, 629–639. https://doi.org/10.1016/j.carbon.2019.01.063.

  • 34.

    Agnihotri, P.K.; Basu, S.; Kar, K.K. Effect of carbon nanotube length and density on the properties of carbon nanotube-coated carbon fiber/polyester composites. Carbon 2011, 49, 3098–3106. https://doi.org/10.1016/j.carbon.2011.03.032.

  • 35.

    Yesu, A.; Srivastava, M.; Agnihotri, P.K.; et al. Minimizing environmental degradation in fracture toughness of carbon fiber/epoxy composites using carbon nanotubes. Eng. Fract. Mech. 2023, 294, 109734. https://doi.org/10.1016/j.engfracmech.2023.109734.

  • 36.

    Khan, S.; Bedi, H.S.; Agnihotri, P.K. Augmenting mode-II fracture toughness of carbon fiber/epoxy composites through carbon nanotube grafting. Eng. Fract. Mech. 2018, 204, 211–220. https://doi.org/10.1016/j.engfracmech.2018.10.014.

  • 37.

    Bedi, H.S.; Billing, B.K.; Agnihotri, P.K. Interfacial shear strength of carbon nanotubes based hybrid composites: Effect of loading rate. Frat. Integrità Strutt. 2019, 13, 571–576. https://doi.org/10.3221/igf-esis.48.55.

  • 38.

    Bedi, H.S.; Padhee, S.S.; Agnihotri, P.K. Effect of carbon nanotube grafting on the wettability and average mechanical properties of carbon fiber/polymer multiscale composites. Polym. Compos. 2018, 39, E1184–E1195. https://doi.org/10.1002/pc.24714.

  • 39.

    Bedi, H.S.; Tiwari, M.; Agnihotri, P.K. Quantitative determination of size and properties of interphases in carbon nanotube-based multiscale composites. Carbon 2018, 132, 181–190. https://doi.org/10.1016/j.carbon.2018.02.059.

  • 40.

    Kar, K.K.; Kumar, P.; Iyengar, N.G.R.; et al. Carbon Nanotube and Nanoparticles Coated Carbon Fiber Reinforced Polymer Hybrid Composite with Improved Thermomechanical Properties and a Process for Preparation Thereof. Patent No. 1813/DEL/2005, 14 July 2005.

  • 41.

    Bedi, H.S.; Billing, B.K.; Agnihotri, P.K. Interphase engineering in carbon fiber/epoxy composites: Rate sensitivity of interfacial shear strength and interfacial fracture toughness. Polym. Compos. 2020, 41, 2803–2815. https://doi.org/10.1002/pc.25577.

  • 42.

    Qian, H.; Bismarck, A.; Greenhalgh, E.S.; et al. Carbon nanotube grafted carbon fibres: A study of wetting and fibre fragmentation. Compos. Part A Appl. Sci. Manuf. 2010, 41, 1107–1114. https://doi.org/10.1016/j.compositesa.2010.04.004.

  • 43.

    Chatterjee, K.; Kumar, V.; Agnihotri, P.K.; et al. On the Importance of the Metal Catalyst Layer to the Performance of CNT-Based Supercapacitor Electrodes. IEEE Trans. Nanotechnol. 2025, 24, 48–53. https://doi.org/10.1109/tnano.2024.3523412.

  • 44.

    Qin, J.; Wang, C.; Yao, Z.; et al. Growing carbon nanotubes on continuous carbon fibers to produce composites with improved interfacial properties: A step towards commercial production and application. Compos. Sci. Technol. 2021, 211, 108870. https://doi.org/10.1016/j.compscitech.2021.108870.

  • 45.

    Lv, P.; Feng, Y.Y.; Zhang, P.; et al. Increasing the interfacial strength in carbon fiber/epoxy composites by controlling the orientation and length of carbon nanotubes grown on the fibers. Carbon 2011, 49, 4665–4673. https://doi.org/10.1016/j.carbon.2011.06.064.

  • 46.

    Zheng, L.; Wang, Y.; Qin, J.; et al. Scalable manufacturing of carbon nanotubes on continuous carbon fibers surface from chemical vapor deposition. Vacuum 2018, 152, 84–90. https://doi.org/10.1016/j.vacuum.2018.03.011.

  • 47.

    Deng, Y.; Islam, M.S.; Tong, L. Effects of grafting strength and density on interfacial shear strength of carbon nanotube grafted carbon fibre reinforced composites. Compos. Sci. Technol. 2018, 168, 195–202. https://doi.org/10.1016/j.compscitech.2018.09.025.

  • 48.

    Gao, B.; Zhang, R.; He, M.; et al. Effect of a multiscale reinforcement by carbon fiber surface treatment with graphene oxide/carbon nanotubes on the mechanical properties of reinforced carbon/carbon composites. Compos. Part A Appl. Sci. Manuf. 2016, 90, 433–440. https://doi.org/10.1016/j.compositesa.2016.08.012.

  • 49.

    Li, R.; Lachman, N.; Florin, P.; et al. Hierarchical carbon nanotube carbon fiber unidirectional composites with preserved tensile and interfacial properties. Compos. Sci. Technol. 2015, 117, 139–145. https://doi.org/10.1016/j.compscitech.2015.04.014.

  • 50.

    Agnihotri, P.K.; Kar, K.K.; Basu, S. Cohesive zone model of carbon nanotube-coated carbon fiber/polyester composites. Model. Simul. Mater. Sci. Eng. 2012, 20, 035014. https://doi.org/10.1088/0965-0393/20/3/035014.

  • 51.

    Zhao, Z.J.; Zhang, B.Y.; Du, Y.; et al. MWCNT modified structure-conductive composite and its electromagnetic shielding behavior. Compos. Part B Eng. 2017, 130, 21–27. https://doi.org/10.1016/j.compositesb.2017.07.033.

  • 52.

    Xiao, C.; Tan, Y.; Wang, X.; et al. Study on interfacial and mechanical improvement of carbon fiber/epoxy composites by depositing multi-walled carbon nanotubes on fibers. Chem. Phys. Lett. 2018, 703, 8–16. https://doi.org/10.1016/j.cplett.2018.05.012.

  • 53.

    Xu, N.; Li, Y.; Zheng, T.; et al. A mussel-inspired strategy for CNT/carbon fiber reinforced epoxy composite by hierarchical surface modification. Colloids Surf. A Physicochem. Eng. Asp. 2022, 635, 128085. https://doi.org/10.1016/j.colsurfa.2021.128085.

  • 54.

    Yao, Z.; Wang, C.; Lu, R.; et al. Fracture investigation of functionalized carbon nanotubes-grown carbon fiber fabrics/epoxy composites. Compos. Sci. Technol. 2020, 195, 108161. https://doi.org/10.1016/j.compscitech.2020.108161.

  • 55.

    Singh, B.P.; Choudhary, V.; Saini, P.; et al. Designing of epoxy composites reinforced with carbon nanotubes grown carbon fiber fabric for improved electromagnetic interference shielding. AIP Adv. 2012, 2, 022151. https://doi.org/10.1063/1.4730043.

  • 56.

    Du, H.; He, Y.; Song, H.; et al. Real-Time Structural Monitoring and Effective Interlaminar Reinforcement of Carbon Fiber Composites Hybrid with Surface Modified Non-Woven Silk Fabric. Polym. Compos. 2025, 46, 14943–14956. https://doi.org/10.1002/pc.30104.

  • 57.

    Zhang, C.; Zhang, G.; Shi, X.; et al. Effects of carbon nanotubes on the interlaminar shear strength and fracture toughness of carbon fiber composite laminates: A review. J. Mater. Sci. 2022, 57, 2388–2410. https://doi.org/10.1007/s10853-021-06734-z.

  • 58.

    Song, Y.; Zheng, N.; Dong, X.; et al. Flexible Carboxylated CNT/PA66 Nanofibrous Mat Interleaved Carbon Fiber/Epoxy Laminates with Improved Interlaminar Fracture Toughness and Flexural Properties. Ind. Eng. Chem. Res. 2020, 59, 1151–1158. https://doi.org/10.1021/acs.iecr.9b05854.

  • 59.

    Gupta, H.; Agnihotri, P.K.; Basu, S.; et al. Carbon nanotube grafting for better electromagnetic shielding with carbon fiber/epoxy composites. Polym. Compos. 2025, 46, S856–S866. https://doi.org/10.1002/pc.30003.

  • 60.

    Badakhsh, A.; An, K.H.; Kim, B.J. Enhanced Surface Energetics of CNT-Grafted Carbon Fibers for Superior Electrical and Mechanical Properties in CFRPs. Polymers 2020, 12, 1432. https://doi.org/10.3390/polym12061432.

  • 61.

    Lee, G.; Sung, M.; Youk, J.H.; et al. Improved tensile strength of carbon nanotube-grafted carbon fiber reinforced composites. Compos. Struct. 2019, 220, 580–591. https://doi.org/10.1016/j.compstruct.2019.04.037.

  • 62.

    Srivastava, M.K.; Gupta, H.; Gupta, N.; et al. Electromagnetic Shielding With CFRP Composites: Conducting Matrix Versus Conducting Fibers. Polym. Compos. 2025, 46, 17029–17040. https://doi.org/10.1002/pc.70093.

  • 63.

    Chauhan, A.; Agnihotri, P.K.; Basu, S. Molecular dynamic study on modulating the interfacial thermal conductivity of carbon fiber/epoxy interfaces. Comput. Mater. Sci. 2023, 217, 111914. https://doi.org/10.1016/j.commatsci.2022.111914.

  • 64.

    Chen, J.; Xiong, X.; Xiao, P. The effect of carbon nanotube growing on carbon fibers on the microstructure of the pyrolytic carbon and the thermal conductivity of carbon/carbon composites. Mater. Chem. Phys. 2009, 116, 57–61. https://doi.org/10.1016/j.matchemphys.2009.02.044.

  • 65.

    Su, S.; Wang, Y.; Qin, J.; et al. Continuous method for grafting CNTs on the surface of carbon fibers based on cobalt catalyst assisted by thiourea. J. Mater. Sci. 2019, 54, 12498–12508. https://doi.org/10.1007/s10853-019-03827-8.

  • 66.

    Anthony, D.B.; Sui, X.; Kellersztein, I.; et al. Continuous carbon nanotube synthesis on charged carbon fibers. Compos. Part A Appl. Sci. Manuf. 2018, 112, 525–538. https://doi.org/10.1016/j.compositesa.2018.05.027.

  • 67.

    Larsson, C.; Larsson, F.; Tavano, R.; et al. Poro-mechanical analysis of a structural battery electrolyte: Experimental study and model calibration. Mech. Mater. 2026, 216, 105632. https://doi.org/10.1016/j.mechmat.2026.105632.

  • 68.

    Chaudhary, R.; Tavano, R.; Xu, J.; et al. Lithium-Ion Transport in Carbon Fibers for Structural Batteries. Adv. Energy Sustain. Res. 2026, 7, e202500377. https://doi.org/10.1002/aesr.202500377.

Share this article:
Download PDF
DOI
10.53941/pcm.2026.100004
Issue
Volume 2, Issue 1
How to Cite
Srivastava, M. K.; Gupta, H.; Gupta , N.; Basu, S.; Agnihotri, P. K. Hierarchical Composites with Carbon Nanotube Grafted Carbon Fibers: A Critical Assessment. Progress in Composite Materials 2026, 2 (1), 4. https://doi.org/10.53941/pcm.2026.100004.
RIS
BibTex
Copyright & License
article copyright Image
Copyright (c) 2026 by the authors.
Article Metrics
26
Article Views
0
Citations