PERA Transactions/
Articles/
2609005233
  • Open Access
  • Review

Recent Advancements in Wireless Charging of Electric Vehicles

  • Vivek Agarwal (IEEE Fellow) *,†,   
  • Utkarsha Sheshrao Bulkunde †,   
  • Gutturu Praveen †

Received: 09 Sep 2026 | Revised: 18 Sep 2026 | Accepted: 20 Sep 2026 | Published: 30 Sep 2026

Abstract

Wireless power transfer (WPT) is emerging as a promising technology for convenient, safe, and contactless charging of electric vehicles (EVs). The performance of a WPT system is strongly influenced by the magnetic coupler, compensation network, and power electronic converter. This paper presents a systematic review of basic and advanced coil structures, compensation networks, and converter configurations. Various advanced coil geometries developed to improve coupling, power density, and tolerance to lateral misalignment are discussed, along with compensation techniques aimed at achieving soft switching, reduced reactive power, and improved misalignment tolerance and charging characteristics. Recent power electronic converter topologies and their suitability for reliable, efficient, scalable, and bidirectional EV charging are also reviewed. In addition, a systematic design methodology of a series-series compensated WPT system is presented by considering key operating constraints, including bifurcation phenomenon, zero voltage switching (ZVS), maximum power transfer, and maximum efficiency. The paper further discusses emerging challenges and future research trends. The review provides a comprehensive perspective on the current state of EV-WPT technology and identifies potential directions for developing high-performance, reliable, and cost-effective charging systems.

 

References 

  • 1.

    Detka, K.; Górecki, K. Wireless power transfer—A review. Energies 2022, 15, 7236. https://doi.org/10.3390/en15197236.

  • 2.

    Patil, D.; McDonough, M.K.; Miller, J.M.; et al. Wireless Power Transfer for Vehicular Applications: Overview and Challenges. IEEE Trans. Transp. Electrif. 2018, 4, 3–37. https://doi.org/10.1109/tte.2017.2780627.

  • 3.

    Kurs, A.; Karalis, A.; Moffatt, R.; et al. Wireless power transfer via strongly coupled magnetic resonances. Science 2007, 317, 83–86. https://doi.org/10.1126/science.1143254.

  • 4.

    Chittoor, P.K.; Chokkalingam, B.; Mihet-Popa, L. A review on UAV wireless charging: Fundamentals, applications, charging techniques and standards. IEEE Access 2021, 9, 69235–69266. https://doi.org/10.1109/access.2021.3077041.

  • 5.

    Mahesh, A.; Chokkalingam, B.; Mihet-Popa, L. Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review. IEEE Access 2021, 9, 137667–137713. https://doi.org/10.1109/access.2021.3116678.

  • 6.

    Haerinia, M.; Shadid, R. Wireless power transfer approaches for medical implants: A review. Signals 2020, 1, 209–229. https://doi.org/10.3390/signals1020012.

  • 7.

    Yu, X.; Feng, J.; Zhu, L.; et al. Design and optimization of a planar omnidirectional wireless power transfer system for consumer electronics. IEEE Open J. Power Electron. 2024, 5, 311–322. https://doi.org/10.1109/ojpel.2024.3360878.

  • 8.

    International Energy Agency. Prospects for Electric Vehicle Deployment. Global EV Outlook 2023. Available online: https://www.iea.org/reports/global-ev-outlook-2023/prospects-for-electric-vehicle-deployment (accessed on: 24 September 2026).

  • 9.

    SAE Standard J2954_202408; Wireless Power Transfer for Light-Duty Plug-In/Electric Vehicles and Alignment Methodology. SAE International: Warrendale, PA, USA, 2024. Available online: https://www.sae.org/standards/content/j2954_202408/ (accessed on: 24 September 2026).

  • 10.

    Maji, S.; Etta, D.; Afridi, K.K. A High-Power Large Air-Gap Multi-MHz dc-dc Capacitive Wireless Power Transfer System for Electric Vehicle Charging. In Proceedings of the 2023 IEEE Wireless Power Technology Conference and Expo (WPTCE), San Diego, CA, USA, 4–8 June 2023; pp. 1–6. https://doi.org/10.1109/wptce56855.2023.10215665.

  • 11.

    Lecluyse, C.; Minnaert, B.; Kleemann, M. A review of the current state of technology of capacitive wireless power transfer. Energies 2021, 14, 5862. https://doi.org/10.3390/en14185862.

  • 12.

    Wang, Q.; Li, Z.; Yang, B.; et al. Inductive power transfer system with constant current-constant voltage charging tolerating misalignment based on multiobjective optimization for compensation topology. IEEE Trans. Power Electron. 2025, 40, 4581–4591. https://doi.org/10.1109/tpel.2024.3435424.

  • 13.

    Nguyen, D.M.; Kishk, M.A.; Alouini, M.S. Dynamic charging as a complementary approach in modern EV charging infrastructure. Sci. Rep. 2024, 14, 5785. https://doi.org/10.1038/s41598-024-55863-3.

  • 14.

    Rahulkumar, J.; Narayanamoorthi, R.; Vishnuram, P.; et al. An Empirical Survey on Wireless Inductive Power Pad and Resonant Magnetic Field Coupling for In-Motion EV Charging System. IEEE Access 2023, 11, 4660–4693. https://doi.org/10.1109/access.2022.3232852.

  • 15.

    Wang, L.; Madawala, U.K.; Wong, M.C. A Wireless Vehicle-to-Grid-to-Home Power Interface with an Adaptive DC Link. IEEE J. Emerg. Sel. Top. Power Electron. 2021, 9, 2373–2383. https://doi.org/10.1109/jestpe.2020.2992776.

  • 16.

    Safari, A.; Rahimi, A. Vehicle-to-everything mode of operation technologies: A state-of-art systematic review. Appl. Energy 2025, 398, 126382. https://doi.org/10.1016/j.apenergy.2025.126382.

  • 17.

    Musavi, F.; Edington, M.; Eberle, W.; et al. Energy efficiency in plug-in hybrid electric vehicle chargers: Evaluation and comparison of front end AC–DC topologies. In Proceedings of the IEEE Energy Conversion Congress and Exposition, Phoenix, AZ, USA, 17–22 September 2011; pp. 273–280. https://doi.org/10.1109/ecce.2011.6063780.

  • 18.

    Lee, P.W.; Lee, Y.S.; Cheng, D.K.W.; et al. Steady-state analysis of an interleaved boost converter with coupled inductors. IEEE Trans. Ind. Electron. 2000, 47, 787–795. https://doi.org/10.1109/41.857959.

  • 19.

    Oruçöz, U.; Şehirli, E. WPT charging system with average current controlled PFC sepic converter. In Proceedings of the 2023 IEEE IAS Global Conference on Emerging Technologies (GlobConET), London, UK, 19–21 May 2023; pp. 1–5. https://doi.org/10.1109/globconet56651.2023.10150108.

  • 20.

    Gonzalez-Santini, N.S.; Zeng, H.; Yu, Y.; et al. Z-source resonant converter with power factor correction for wireless power transfer applications. IEEE Trans. Power Electron. 2016, 31, 7691–7700. https://doi.org/10.1109/tpel.2016.2560174.

  • 21.

    Mahdavi, M.S.; Gharehpetian, G.B. A new wireless power transfer topology based on quasi-Z-source and LLC resonant network with low input current THD. In Proceedings of the 10th International Power Electronics, Drive Systems and Technologies Conference (PEDSTC), Shiraz, Iran, 12–14 February 2019; pp. 373–376. https://doi.org/10.1109/pedstc.2019.8697230.

  • 22.

    Pevere, A.; Petrella, R.; Mi, C.C.; et al. Design of a high efficiency 22 kW wireless power transfer system for EVs fast contactless charging stations. In Proceedings of the 2014 IEEE International Electric Vehicle Conference (IEVC), Florence, Italy, 17–19 December 2014; pp. 1–7. https://doi.org/10.1109/ievc.2014.7056221.

  • 23.

    Zan, X.; Avestruz, A.T. 100 MHz Symmetric Current-Mode Class D Wireless Power Transfer. IEEE J. Emerg. Sel. Top. Power Electron. 2023, 11, 4508–4525. https://doi.org/10.1109/jestpe.2022.3148973.

  • 24.

    Wang, X.; Leng, M.; Zhang, X.; et al. Multioutput wireless charger for drone swarms with reduced switch requirements and independent regulation capability. IEEE Trans. Ind. Electron. 2024, 71, 4883–4895. https://doi.org/10.1109/tie.2023.3277116.

  • 25.

    Zhao, P.; Ji, X.; Wang, H.; et al. H5-bridge-based bowl-shape wireless charger for multiple loads. IEEE Trans. Ind. Electron. 2023, 70, 8853–8861. https://doi.org/10.1109/tie.2022.3212386.

  • 26.

    Ke, G.; Chen, Q.; Zhang, S.; et al. A single-ended hybrid resonant converter with high misalignment tolerance. IEEE Trans. Power Electron. 2022, 37, 12841–12852. https://doi.org/10.1109/tpel.2022.3173633.

  • 27.

    Mai, R.; Liu, Y.; Li, Y.; et al. An Active-Rectifier-Based Maximum Efficiency Tracking Method Using an Additional Measurement Coil for Wireless Power Transfer. IEEE Trans. Power Electron. 2018, 33, 716–728. https://doi.org/10.1109/tpel.2017.2665040.

  • 28.

    Song, K.; Zhang, H.; Yang, G.; et al. A Tuning Method for Wireless Power Transfer System against Dual-side Capacitance Drift Based on Equivalent Impedance Decoupling. In Proceedings of the 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Seoul, Republic of Korea, 15–19 November 2020; pp. 350–353. https://doi.org/10.1109/wow47795.2020.9291320.

  • 29.

    Kutkut, N.H.; Divan, D.M.; Gascoigne, R.W. An Improved Full-Bridge Zero-Voltage Switching PWM Converter Using a Two-Inductor Rectifier. IEEE Trans. Ind. Appl. 1995, 31, 119–126. https://doi.org/10.1109/28.363041.

  • 30.

    Huang, K.P.; Hsieh, H.I.; Wai, R.J. Phase-shifted full-bridge converter for a half-current-multiplier rectifier using an autotransformer-based filter. IEEE Trans. Transp. Electrif. 2020, 6, 199–212. https://doi.org/10.1109/tte.2020.2971344.

  • 31.

    Shi, L.; Delgado, A.; Ramos, R.; et al. A Wireless Power Transfer System with Inverse Coupled Current Doubler Rectifier for High-Output Current Applications. IEEE Trans. Ind. Electron. 2022, 69, 4607–4616. https://doi.org/10.1109/tie.2021.3078350.

  • 32.

    Lin, B.R.; Lin, G.H.; Jian, A. Resonant Converter with Voltage-Doubler Rectifier or Full-Bridge Rectifier for Wide-Output Voltage and High-Power Applications. Electronics 2019, 8, 3. https://doi.org/10.3390/electronics8010003.

  • 33.

    Huang, Z.; Wong, S.C.; Tse, C.K. Control Design for Optimizing Efficiency in Inductive Power Transfer Systems. IEEE Trans. Power Electron. 2018, 33, 4523–4534. https://doi.org/10.1109/tpel.2017.2724039.

  • 34.

    Nayak, P.S.R.; Kishan, D. Performance analysis of series/parallel and dual side LCC compensation topologies of inductive power transfer for EV battery charging system. Front. Energy 2020, 14, 166–179. https://doi.org/10.1007/s11708-018-0549-z.

  • 35.

    Fu, M.; Ma, C.; Zhu, X. A Cascaded Boost–Buck Converter for High-Efficiency Wireless Power Transfer Systems. IEEE Trans. Ind. Inform. 2014, 10, 1972–1980. https://doi.org/10.1109/tii.2013.2291682.

  • 36.

    Luo, J.; Xiao, W.; Zhang, G.; et al. Novel Cuk-Based Bridgeless Rectifier of Wireless Power Transfer System with Wide Power Modulation Range and Low Current Ripple. IEEE Trans. Ind. Electron. 2022, 69, 2533–2544. https://doi.org/10.1109/tie.2021.3066927.

  • 37.

    Rattan Kumar, V.; Das, S.; Sasidharan, B.; et al. Interleaved PFC-SEPIC Converter Based Wireless Power Transfer for EV Charging System. In Proceedings of the 2025 8th International Conference on Circuit, Power & Computing Technologies (ICCPCT), Kollam, India, 7–8 August 2025; pp. 347–351. https://doi.org/10.1109/iccpct65132.2025.11176760.

  • 38.

    Fukuoka, H.; Iga, Y.; Omori, H.; et al. A novel type of wireless V2H system with bidirectional resonant single-ended inverter. In Proceedings of the 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 ECCE-ASIA), Hiroshima, Japan, 18–21 May 2014; pp. 3341–3345. https://doi.org/10.1109/ipec.2014.6870166.

  • 39.

    Swain, A.K.; Agarwal, V. A Single-Stage Matrix Converter-based SRC-CV Controller for EV Charging Systems with an Integral Anti-Windup PI Controller. In Proceedings of the 2025 IEEE Energy Conversion Congress & Exposition Asia (ECCE-Asia), Bengaluru, India, 11–14 May 2025; pp. 1–6. https://doi.org/10.1109/ecce-asia63110.2025.11112066.

  • 40.

    Mittal, S.; Agarwal, V. Real Time Feedforward Decoupled Control of Triple Active Bridge Converter for Charging of Electric Vehicles. In Proceedings of the 2025 IEEE Energy Conversion Congress & Exposition Asia (ECCE-Asia), Bengaluru, India, 11–14 May 2025; pp. 1–5. https://doi.org/10.1109/ecce-asia63110.2025.11111849.

  • 41.

    Li, Y.; Mai, R.; Yang, M.; et al. Cascaded multi-level inverter based IPT systems for high power applications. J. Power Electron. 2015, 15, 1508–1516. https://doi.org/10.6113/jpe.2015.15.6.1508.

  • 42.

    Wang, W.V.; Thrimawithana, D.J.; Neuburger, M. An Si MOSFET-based high-power wireless EV charger with a wide ZVS operating range. IEEE Trans. Power Electron. 2021, 36, 11163–11173. https://doi.org/10.1109/tpel.2021.3071516.

  • 43.

    Chen, H.; Qian, Z.; Zhang, R.; et al. Modular Four-Channel 50 kW WPT System with Decoupled Coil Design for Fast EV Charging. IEEE Access 2021, 9, 136083–136093. https://doi.org/10.1109/access.2021.3116696.

  • 44.

    Alzuguren, I.; Garcia-Bediaga, A.; Avila, A.; et al. Floating capacitor integrated DAB for single-phase, single-stage PFC in wireless battery charging application. IEEE Open J. Power Electron. 2023, 4, 727–739. https://doi.org/10.1109/ojpel.2023.3313314.

  • 45.

    Sahoo, G.M.; Agarwal, V. Next-Generation 3-Φ Reduced-Stage AC-DC Converter with Minimal Switch Count for High-Power Isolated On-Board Chargers. In Proceedings of the 2025 IEEE Energy Conversion Congress & Exposition Asia (ECCE-Asia), Bengaluru, India, 11–14 May 2025; pp. 1–5. https://doi.org/10.1109/ecce-asia63110.2025.11111896.

  • 46.

    Bac, N.X.; Vilathgamuwa, D.M.; Madawala, U.K. A SiC-based matrix converter topology for inductive power transfer system. IEEE Trans. Power Electron. 2014, 29, 4029–4038. https://doi.org/10.1109/tpel.2013.2291434.

  • 47.

    Huynh, P.S.; Ronanki, D.; Vincent, D.; et al. Direct AC–AC active-clamped half-bridge converter for inductive charging applications. IEEE Trans. Power Electron. 2021, 36, 1356–1365. https://doi.org/10.1109/tpel.2020.3009395.

  • 48.

    Moghaddami, M.; Anzalchi, A.; Sarwat, A.I. Single-stage three-phase AC–AC matrix converter for inductive power transfer systems. IEEE Trans. Ind. Electron. 2016, 63, 6613–6622. https://doi.org/10.1109/tie.2016.2563408.

  • 49.

    Asa, E.; Onar, O.C.; Galigekere, V.P.; et al. A Novel Three-Phase Oak Ridge AC/DC Converter for Wireless EV Charger Applications. In Proceedings of the 2021 IEEE Applied Power Electronics Conference and Exposition (APEC), Phoenix, AZ, USA, 14–17 June 2021; pp. 437–443. https://doi.org/10.1109/apec42165.2021.9487063.

  • 50.

    Riekerk, C.; Dong, J.; Soeiro, T.B.; et al. Quasi-Two-Level Operation of a Neutral-Point-Clamped Converter for 50 kW Inductive Power Transfer. IEEE J. Wirel. Power Technol. 2026, 1, 0102108. https://doi.org/10.1109/jwpt.2026.3714772.

  • 51.

    Nguyen, B.X.; Vilathgamuwa, D.M.; Foo, G.; et al. Cascaded multilevel converter based bidirectional inductive power transfer (BIPT) system. In Proceedings of the 2014 International Power Electronics Conference (IPEC-Hiroshima 2014-ECCE ASIA), Hiroshima, Japan, 18–21 May 2014; pp. 2722–2728. https://doi.org/10.1109/ipec.2014.6869975.

  • 52.

    Wang, W.V.; Thirmawithana, D.J.; Riar, B.; et al. A Novel Integrated Boost Modular Multilevel Converter for High Power Wireless EV Charging. In Proceedings of the 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, USA, 23–27 September 2018; pp. 81–88. https://doi.org/10.1109/ecce.2018.8557404.

  • 53.

    Rahnamaee, H.R.; Madawala, U.K.; Thrimawithana, D.J. A multi-level converter for high power-high frequency IPT systems. In Proceedings of the 2014 IEEE 5th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), Galway, Ireland, 24–27 June 2014; pp. 1–6. https://doi.org/10.1109/pedg.2014.6878623.

  • 54.

    Xue, L.; Galigekere, V.P.; Gurpinar, E.; et al. Modular Power Electronics Approach for High-Power Dynamic Wireless Charging System. IEEE Trans. Transp. Electrif. 2024, 10, 976–988. https://doi.org/10.1109/tte.2023.3270061.

  • 55.

    Van Do, T.; Trovao, J.P.F.; Li, K.; et al. Wide-Bandgap Power Semiconductors for Electric Vehicle Systems: Challenges and Trends. IEEE Veh. Technol. Mag. 2021, 16, 89–98. https://doi.org/10.1109/mvt.2021.3112943.

  • 56.

    Dang, K.; Zhang, J.; Zhou, H.; et al. Lateral GaN Schottky Barrier Diode for Wireless High-Power Transfer Application with High RF/DC Conversion Efficiency: From Circuit Construction and Device Technologies to System Demonstration. IEEE Trans. Ind. Electron. 2020, 67, 6597–6606. https://doi.org/10.1109/tie.2019.2939968.

  • 57.

    Liu, Y.; Liu, C.; Gao, X.; et al. Novel Output Regulation Method for Three-Phase Three-Level Wireless EV Charging System. IEEE Trans. Magn. 2022, 58, 1–7. https://doi.org/10.1109/tmag.2021.3080706.

  • 58.

    Guidi, G.; D’Arco, S.; Nishikawa, K.; et al. Load Balancing of a Modular Multilevel Grid-Interface Converter for Transformer-Less Large-Scale Wireless Electric Vehicle Charging Infrastructure. IEEE J. Emerg. Sel. Top. Power Electron. 2021, 9, 4587–4605. https://doi.org/10.1109/jestpe.2020.3043211.

  • 59.

    Deng, Z.; Zhang, S.; Zhu, G.; et al. Direct Matrix Converter-Based Modular High-Power Wireless Charging Systems for Heavy-Duty Electric Vehicles. IEEE J. Wirel. Power Technol. 2026, 1, 0100511. https://doi.org/10.1109/jwpt.2026.3670766.

  • 60.

    Chen, X.; Shen, H.; Liu, F. Three-Stage Scalable Multimodule Parallel Wireless Power Transfer System with High-Distance-Diameter Ratio in Low-Voltage Applications. IEEE Trans. Transp. Electrif. 2025, 11, 9989–10000. https://doi.org/10.1109/tte.2025.3548086.

  • 61.

    Kumar, K.; Sanasam, M.; Mali, V.; et al. Investigating critical role of power flow analysis in optimizing four-port converters for electric vehicle charging. Eng. Res. Express 2026, 8, 085318. https://doi.org/10.1088/2631-8695/ae5e22.

  • 62.

    Rahman, M.S.; Dumpeti, S.K.; Davoodi, M.; et al. Model Predictive Control for Misalignment Compensation in Dynamic Wireless Charging of Electric Vehicles. Energies 2026, 19, 2640. https://doi.org/10.3390/en19112640.

  • 63.

    Howaidi, M.; Mahmoud, Y. A Comprehensive Review of Wireless Charging Systems for Automated Guided Vehicles. IEEE Access 2026, 14, 5821–5854. https://doi.org/10.1109/access.2026.3650869.

  • 64.

    Mutyam, L.; Agarwal, V. A Novel High Power Three Phase Integrated Battery Charger for Plug-in Electric Vehicles. In Proceedings of the 2022 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Jaipur, India, 14–17 December 2022; pp. 1–6. https://doi.org/10.1109/pedes56012.2022.10080755.

  • 65.

    Praveen, G.; Agarwal, V. Towards a Unified Charging Infrastructure: Integrating Conductive and Wireless Charging Methods. In Proceedings of the 2025 IEEE Energy Conversion Congress & Exposition Asia (ECCE-Asia), Bengaluru, India, 11–14 May 2025; pp. 1–6. https://doi.org/10.1109/ecce-asia63110.2025.11112445.

  • 66.

    Wang, Y.; Mai, J.; Yao, Y.; et al. Analysis and Design of an IPT System Based on S/SP Compensation with Improved Output Voltage Regulation. IEEE Trans. Ind. Inform. 2020, 16, 3256–3266. https://doi.org/10.1109/tii.2019.2952918.

  • 67.

    Huang, Z.; Fang, Z.; Lam, C.S.; et al. Cost-Effective Compensation Design for Output Customization and Efficiency Optimization in Series/Series-Parallel Inductive Power Transfer Converter. IEEE Trans. Ind. Electron. 2020, 67, 10356–10365. https://doi.org/10.1109/tie.2019.2959491.

  • 68.

    Yao, Y.; Wang, Y.; Liu, X.; et al. A Novel Parameter Tuning Method for a Double-Sided LCL Compensated WPT System with Better Comprehensive Performance. IEEE Trans. Power Electron. 2018, 33, 8525–8536. https://doi.org/10.1109/tpel.2017.2778255.

  • 69.

    Song, K.; Wei, R.; Yang, G.; et al. Constant Current Charging and Maximum System Efficiency Tracking for Wireless Charging Systems Employing Dual-Side Control. IEEE Trans. Ind. Appl. 2020, 56, 622–634. https://doi.org/10.1109/tia.2019.2942278.

  • 70.

    Wang, F.; Zhang, W.; Ye, L.; et al. A Design Method to Implement ZVS for Electric Vehicle Wireless Charging System with Double-Side LCC Compensation. IEEE J. Emerg. Sel. Top. Power Electron. 2021, 9, 3791–3801. https://doi.org/10.1109/jestpe.2020.3012614.

  • 71.

    Vu, V.B.; Tran, D.H.; Choi, W. Implementation of the Constant Current and Constant Voltage Charge of Inductive Power Transfer Systems with the Double-Sided LCC Compensation Topology for Electric Vehicle Battery Charge Applications. IEEE Trans. Power Electron. 2018, 33, 7398–7410. https://doi.org/10.1109/tpel.2017.2766605.

  • 72.

    Mai, R.; Chen, Y.; Zhang, Y.; et al. Optimization of the Passive Components for an S-LCC Topology-Based WPT System for Charging Massive Electric Bicycles. IEEE Trans. Ind. Electron. 2018, 65, 5497–5508. https://doi.org/10.1109/tie.2017.2779437.

  • 73.

    Wang, Y.; Liu, W.; Huangfu, Y. A Primary-Sided CLC Compensated Wireless Power Transfer System Based on the Class D Amplifier. In Proceedings of the IECON 2018—44th Annual Conference of the IEEE Industrial Electronics Society, Washington, DC, USA, 21–23 October 2018; pp. 943–947. https://doi.org/10.1109/iecon.2018.8591707.

  • 74.

    Chen, S.; Chen, Y.; Li, H.; et al. An Operation Mode Selection Method of Dual-Side Bridge Converters for Efficiency Optimization in Inductive Power Transfer. IEEE Trans. Power Electron. 2020, 35, 9992–9997. https://doi.org/10.1109/tpel.2020.2979769.

  • 75.

    Li, Y.; Hu, J.; Li, X.; et al. Efficiency Analysis and Optimization Control for Input-Parallel Output-Series Wireless Power Transfer Systems. IEEE Trans. Power Electron. 2020, 35, 1074–1085. https://doi.org/10.1109/tpel.2019.2914299.

  • 76.

    Gao, W.; Jiang, L.; Chen, Q.; et al. Analysis and Design of an Integrated LCL-S Contactless Resonant Converter. In Proceedings of the 2018 IEEE Applied Power Electronics Conference and Exposition (APEC), San Antonio, TX, USA, 4–8 March 2018; pp. 3178–3182. https://doi.org/10.1109/apec.2018.8341556.

  • 77.

    Lu, J.; Zhu, G.; Wang, H.; et al. Sensitivity Analysis of Inductive Power Transfer Systems with Voltage-Fed Compensation Topologies. IEEE Trans. Veh. Technol. 2019, 68, 4502–4513. https://doi.org/10.1109/tvt.2019.2903565.

  • 78.

    Vu, V.B.; Phan, V.T.; Dahidah, M.; et al. Multiple Output Inductive Charger for Electric Vehicles. IEEE Trans. Power Electron. 2019, 34, 7350–7368. https://doi.org/10.1109/tpel.2018.2882945.

  • 79.

    Yao, Y.; Wang, Y.; Liu, X.; et al. Particle Swarm Optimization-Based Parameter Design Method for S/CLC-Compensated IPT Systems Featuring High Tolerance to Misalignment and Load Variation. IEEE Trans. Power Electron. 2019, 34, 5268–5282. https://doi.org/10.1109/tpel.2018.2870530.

  • 80.

    Wang, Y.; Yao, Y.; Liu, X.; et al. S/CLC Compensation Topology Analysis and Circular Coil Design for Wireless Power Transfer. IEEE Trans. Transp. Electrif. 2017, 3, 496–507. https://doi.org/10.1109/tte.2017.2651067.

  • 81.

    Wang, S.; Chen, J.; Hu, Z.; et al. Optimisation design for series–series dynamic WPT system maintaining stable transfer power. IET Power Electron. 2017, 10, 987–995. https://doi.org/10.1049/iet-pel.2016.0839.

  • 82.

    Feng, H.; Cai, T.; Duan, S.; et al. An LCC-Compensated Resonant Converter Optimized for Robust Reaction to Large Coupling Variation in Dynamic Wireless Power Transfer. IEEE Trans. Ind. Electron. 2016, 63, 6591–6601. https://doi.org/10.1109/tie.2016.2589922.

  • 83.

    Feng, H.; Dayerizadeh, A.; Lukic, S.M. A Coupling-Insensitive X-Type IPT System for High Position Tolerance. IEEE Trans. Ind. Electron. 2021, 68, 6917–6926. https://doi.org/10.1109/tie.2020.3000116.

  • 84.

    Mai, J.; Wang, Y.; Yao, Y.; et al. Analysis and Design of High-Misalignment-Tolerant Compensation Topologies with Constant-Current or Constant-Voltage Output for IPT Systems. IEEE Trans. Power Electron. 2021, 36, 2685–2695. https://doi.org/10.1109/tpel.2020.3014687.

  • 85.

    Feng, H.; Cai, T.; Duan, S.; et al. A Dual-Side-Detuned Series–Series Compensated Resonant Converter for Wide Charging Region in a Wireless Power Transfer System. IEEE Trans. Ind. Electron. 2018, 65, 2177–2188. https://doi.org/10.1109/tie.2017.2745455.

  • 86.

    Bulkunde, U.S.; Agarwal, V. Capacitor Switched Detuning Strategy for High Misalignment Tolerance in S-S Compensated Dynamic Wireless Charging of EV. In Proceedings of the 2025 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific), Singapore, 25–28 November 2025; pp. 1–6. https://doi.org/10.1109/itecasia-pacific63742.2025.11344889.

  • 87.

    Chen, C.; Jiang, C.Q.; Ma, T.; et al. Misalignment Tolerance Extension for Inductive Power Transfer System by Utilizing Slight Frequency-Detuned Compensation. IEEE Trans. Transp. Electrif. 2024, 10, 9748–9760. https://doi.org/10.1109/tte.2024.3385831.

  • 88.

    Yang, B.; Li, Y.; Zhang, Z.; et al. A Detuned S-S Compensated IPT System with Two Discrete Frequencies for Maintaining Stable Power Transfer Versus Wide Coupling Variation. IEEE Trans. Transp. Electrif. 2023, 9, 3836–3848. https://doi.org/10.1109/tte.2022.3229178.

  • 89.

    Qu, X.; Yao, Y.; Wang, D.; et al. A Family of Hybrid IPT Topologies with Near Load-Independent Output and High Tolerance to Pad Misalignment. IEEE Trans. Power Electron. 2020, 35, 6867–6877. https://doi.org/10.1109/tpel.2019.2955299.

  • 90.

    Chen, Y.; Yang, B.; Kou, Z.; et al. Hybrid and Reconfigurable IPT Systems with High-Misalignment Tolerance for Constant-Current and Constant-Voltage Battery Charging. IEEE Trans. Power Electron. 2018, 33, 8259–8269. https://doi.org/10.1109/tpel.2018.2809785.

  • 91.

    Chen, Y.; Yang, B.; Li, Q.; et al. Reconfigurable Topology for IPT System Maintaining Stable Transmission Power Over Large Coupling Variation. IEEE Trans. Power Electron. 2020, 35, 4915–4924. https://doi.org/10.1109/tpel.2019.2946778.

  • 92.

    Chen, Y.; He, S.; Yang, B.; et al. Reconfigurable Rectifier-Based Detuned Series-Series Compensated IPT System for Anti-Misalignment and Efficiency Improvement. IEEE Trans. Power Electron. 2023, 38, 2720–2729. https://doi.org/10.1109/tpel.2022.3204592.

  • 93.

    Zhang, Y.; Pan, W.; Wang, H.; et al. Misalignment-Tolerant Dual-Transmitter Electric Vehicle Wireless Charging System with Reconfigurable Topologies. IEEE Trans. Power Electron. 2022, 37, 8816–8819. https://doi.org/10.1109/tpel.2022.3160868.

  • 94.

    Xiong, M.; Song, K.; Yang, F.; et al. Dual Discrete-Frequency Reconfigurable IPT System with High Misalignment Tolerance for Stable Power Transfer Over Extended Coupling Variation. IEEE Trans. Power Electron. 2026, 41, 4340–4350. https://doi.org/10.1109/tpel.2025.3613702.

  • 95.

    Mai, R.; Yang, B.; Chen, Y.; et al. A Misalignment Tolerant IPT System with Intermediate Coils for Constant-Current Output. IEEE Trans. Power Electron. 2019, 34, 7151–7155. https://doi.org/10.1109/tpel.2019.2898686.

  • 96.

    Sis, S.A.; Orta, E. A cross-shape coil structure for use in wireless power applications. Energies 2018, 11, 1094. https://doi.org/10.3390/en11051094.

  • 97.

    Castillo-Zamora, I.U.; Huynh, P.S.; Vincent, D.; et al. Hexagonal Geometry Coil for a WPT High-Power Fast Charging Application. IEEE Trans. Transp. Electrif. 2019, 5, 946–956.

  • 98.

    Bouanou, T.; El Fadil, H.; Lassioui, A.; et al. Analysis of coil parameters and comparison of circular, rectangular, and hexagonal coils used in WPT system for electric vehicle charging. World Electr. Veh. J. 2021, 12, 45. https://doi.org/10.3390/wevj12010045.

  • 99.

    Lin, C.H.; Amir, M.; Tariq, M.; et al. Comprehensive analysis of IPT v/s CPT for wireless EV charging and effect of capacitor plate shape and foreign particle on CPT. Processes 2021, 9, 1619. https://doi.org/10.3390/pr9091619.

  • 100.

    Tejeda, A.; Kim, S.; Lin, F.Y.; et al. A hybrid solenoid coupler for wireless charging applications. IEEE Trans. Power Electron. 2019, 34, 5632–5645. https://doi.org/10.1109/tpel.2018.2867430.

  • 101.

    Jayathurathnage, P.K.S.; Alphones, A.; Vilathgamuwa, D.M.; et al. Optimum transmitter current distribution for dynamic wireless power transfer with segmented array. IEEE Trans. Microw. Theory Tech. 2018, 66, 346–356. https://doi.org/10.1109/tmtt.2017.2698460.

  • 102.

    Budhia, M.; Covic, G.; Boys, J. A new IPT magnetic coupler for electric vehicle charging systems. In Proceedings of the IECON 2010—36th Annual Conference of IEEE Industrial Electronics, Glendale, AZ, USA, 7–10 November 2010; pp. 2487–2492. https://doi.org/10.1109/iecon.2010.5675350.

  • 103.

    Nimri, R.M.; Kamineni, A.; Zane, R. A modular pad design compatible with SAE J2954 for dynamic inductive power transfer. In Proceedings of the 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Seoul, Republic of Korea, 15–19 November 2020; pp. 45–49. https://doi.org/10.1109/wow47795.2020.9291322.

  • 104.

    Bima, M.E.; Bhattacharya, I.; Neste, C.W.V. Experimental Evaluation of Layered DD Coil Structure in a Wireless Power Transfer System. IEEE Trans. Electromagn. Compat. 2020, 62, 1477–1484. https://doi.org/10.1109/TEMC.2020.3002694.

  • 105.

    Xiang, L.; Li, X.; Tian, J.; et al. A crossed DD geometry and its double-coil excitation method for electric vehicle dynamic wireless charging systems. IEEE Access 2018, 6, 45120–45128. https://doi.org/10.1109/access.2018.2864999.

  • 106.

    Chowdhury, M.S.A.; Liang, X. Design and performance evaluation for a new power pad in electric vehicles wireless charging systems. Can. J. Electr. Comput. Eng. 2020, 43, 146–156. https://doi.org/10.1109/cjece.2020.2966148.

  • 107.

    De Marco, D.; Dolara, A.; Longo, M.; et al. Design and performance analysis of pads for dynamic wireless charging of EVs using the finite element method. Energies 2019, 12, 4139. https://doi.org/10.3390/en12214139.

  • 108.

    Wang, C.; Zhu, C.; Wei, G.; et al. Design of compact three-phase receiver for meander-type dynamic wireless power transfer system. IEEE Trans. Power Electron. 2020, 35, 6854–6866. https://doi.org/10.1109/tpel.2019.2955203.

  • 109.

    Kalwar, K.; Mekhilef, S.; Seyedmahmoudian, M.; et al. Coil design for high misalignment tolerant inductive power transfer system for EV charging. Energies 2016, 9, 937. https://doi.org/10.3390/en9110937.

  • 110.

    Erel, M.Z.; Imtiaz, T.; Elsanabary, A.; et al. Enabling Quadruple-D Compensation Coil Integration for Efficient Power Transfer to Receiver in Wireless Power Transfer Systems for EV Charging. IEEE J. Emerg. Sel. Top. Power Electron. 2025, 13, 4278–4289. https://doi.org/10.1109/jestpe.2025.3525594.

  • 111.

    Deng, J.; Li, W.; Nguyen, T.D.; et al. Compact and efficient bipolar coupler for wireless power chargers: Design and analysis. IEEE Trans. Power Electron. 2015, 30, 6130–6140. https://doi.org/10.1109/tpel.2015.2417115.

  • 112.

    Colussi, J.; La Ganga, A.; Re, R.; et al. 100 kW three-phase wireless charger for EV: Experimental validation adopting opposition method. Energies 2021, 14, 2113. https://doi.org/10.3390/en14082113.

  • 113.

    Mosammam, B.M.; Mirsalim, M. New integrated tripolar pad using double-sided LCC compensation for wireless power transfer. IEEE Trans. Veh. Technol. 2020, 69, 15633–15643. https://doi.org/10.1109/tvt.2020.3045371.

  • 114.

    Pries, J.; Galigekere, V.P.N.; Onar, O.C.; et al. A 50-kW Three-Phase Wireless Power Transfer System Using Bipolar Windings and Series Resonant Networks for Rotating Magnetic Fields. IEEE Trans. Power Electron. 2020, 35, 4500–4517. https://doi.org/10.1109/tpel.2019.2942065.

  • 115.

    Rajanikant; Agarwal, V. A Novel Misalignment Tolerant DSSq Receiver Pad with High Power Density for Wireless EV Chargers. IEEE Trans. Ind. Appl. 2026. 1–13. https://doi.org/10.1109/tia.2026.3690430.

  • 116.

    Liu, C.; Jiang, C.; Qiu, C. Overview of coil designs for wireless charging of electric vehicle. In Proceedings of the 2017 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Chongqing, China, 20–22 May 2017; pp. 1–6. https://doi.org/10.1109/wow.2017.7959389.

  • 117.

    Wang, R.; Zhou, X.; Zheng, J.; et al. Research on the efficiency of wireless power transfer system based on multi-auxiliary transmitting coils. In Proceedings of the 2017 4th International Conference on Information Science and Control Engineering (ICISCE), Changsha, China, 21–23 July 2017; pp. 1677–1681. https://doi.org/10.1109/icisce.2017.350.

  • 118.

    Zhang, Y.; Wang, L.; Guo, Y. A novel coil for wireless power transfer system. In Proceedings of the 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Seoul, Republic of Korea, 15–19 November 2020; pp. 102–105. https://doi.org/10.1109/wow47795.2020.9291335.

  • 119.

    Chang, T.Y.; Kung, M.L.; Lin, K.H. Wireless power transfer coils with repeater array for electric scooter. In Proceedings of the 2021 IEEE International Symposium on Radio-Frequency Integration Technology (RFIT), Hualien, Taiwan, 25–27 August 2021; pp. 2021–2023. https://doi.org/10.1109/rfit52905.2021.9565231.

  • 120.

    Sivagami, K.; Prathap, G.V.G.T.; Channegowda, J.; et al. Analysis of hybrid solenoid coupler as transmitter with rectangular and circular coupler as receiver for wireless power transfer. In Proceedings of the 2021 7th International Conference on Electrical Energy Systems (ICEES), Chennai, India, 11–13 February 2021; pp. 299–304. https://doi.org/10.1109/icees51510.2021.9383691.

  • 121.

    Bulkunde, U.S.; Agarwal, V. Novel Coil Pitch Configuration of Rectangular coil for Improved Misalignment Tolerance in Wireless Charging of EVs. In Proceedings of the 2025 IEEE Energy Conversion Congress & Exposition Asia (ECCE-Asia), Bengaluru, India, 11–14 May 2025; pp. 1–6. https://doi.org/10.1109/ecce-asia63110.2025.11112268.

  • 122.

    Miura, N.; Inoue, S.; Kano, Y.; et al. Experimental Demonstration of Rebar Loss Reduction Using Sendust Magnetic Concrete for Wireless Power Transfer. In Proceedings of the 2026 International Power Electronics Conference (IPEC-Nagasaki 2026-ECCE Asia), Nagasaki, Japan, 31 May–4 June 2026; pp. 1–5. https://doi.org/10.23919/ipec-nagasaki2026-ec64663.2026.11597133.

  • 123.

    Bulkunde, U.S.; Agarwal, V. Analysis of Ferrite Arrangement in Rectangular Coil for Wireless Charging of Electric Vehicles. In Proceedings of the 2023 IEEE 3rd International Conference on Smart Technologies for Power, Energy and Control (STPEC), Bhubaneswar, India, 10–13 December 2023; pp. 1–6. https://doi.org/10.1109/stpec59253.2023.10430499.

  • 124.

    Imran, Z.; Moncada, O.A.; Vickers, C.; et al. Full-Scale Thermal and Mechanical Testing of Pavement with Embedded High-Power Dynamic Wireless Power Transfer Coil. IEEE Trans. Transp. Electrif. 2025, 11, 7615–7625. https://doi.org/10.1109/tte.2025.3529854.

  • 125.

    Chen, W.; Li, K.; Xue, B.; et al. Multilayered Frequency Selective Surfaces for Magnetic Field Shielding in Megahertz Wireless Power Transfer Systems. IEEE Trans. Power Electron. 2026, 41, 20691–20708. https://doi.org/10.1109/tpel.2026.3703875.

  • 126.

    Li, Z.; Guo, Y.; Gan, Z.; et al. Research on Hybrid Magnetic Shielding Structure for Electric Vehicle Wireless Power Transfer Systems. IEEE J. Emerg. Sel. Top. Power Electron. 2026, 14, 2668–2682. https://doi.org/10.1109/jestpe.2025.3613995.

  • 127.

    Vaddemani, G.P.R.; Pulletikurthi, R.; Ronanki, D.; et al. A New Bifurcation-Free Inductive Power Transfer System with Interoperable Power Level Capability for Wireless Charging of Electric Vehicles. IEEE Trans. Ind. Appl. 2026, 62, 4465–4477. https://doi.org/10.1109/tia.2025.3619000.

  • 128.

    Zhang, J.; Huang, Z.; Wu, X.; et al. Symmetrical Bipolar Coil with Interoperability and Misalignment Tolerance for EV WPT System. IEEE Access 2025, 13, 191664–191672. https://doi.org/10.1109/access.2025.3624979.

  • 129.

    Jeebklum, P.; Sumpavakup, C. Metamaterial Slabs for Electric Vehicle Wireless Charging Application. IEEE Access 2024, 12, 156717–156729. https://doi.org/10.1109/access.2024.3485180.

  • 130.

    Wang, H.S.; Xiao, H.W.; Cheng, K.W.E. An Advanced Coil Design for Improved Misalignment Tolerance and Performance in Dynamic Wireless Power Transfer. In Proceedings of the 2024 10th International Conference on Power Electronics Systems and Applications (PESA), Hong Kong, China, 5–7 June 2024. https://doi.org/10.1109/pesa62148.2024.10594929.

  • 131.

    Jiang, Y.; Wang, L.; Wang, Y.; et al. Analysis, Design, and Implementation of WPT System for EV’s Battery Charging Based on Optimal Operation Frequency Range. IEEE Trans. Power Electron. 2019, 34, 6890–6905. https://doi.org/10.1109/tpel.2018.2873222.

  • 132.

    Aditya, K.; Williamson, S.S. Design Guidelines to Avoid Bifurcation in a Series–Series Compensated Inductive Power Transfer System. IEEE Trans. Ind. Electron. 2019, 66, 3973–3982. https://doi.org/10.1109/tie.2018.2851953.

  • 133.

    Alam, B.; Mekhilef, S.; Khan, F.; et al. A Comprehensive Review of Foreign Object Detection Methods in Wireless Power Transfer for Electric Vehicles with Conceptual Analysis. IEEE Access 2026, 14, 18897–18912. https://doi.org/10.1109/access.2025.3617934.

  • 134.

    SAE J2954/2:2022; Wireless Power Transfer for Heavy-Duty Electric Vehicles. SAE International: Pittsburgh, PA, USA, 2022.

  • 135.

    IEC 61980-1:2020; Electric Vehicle Wireless Power Transfer (WPT) Systems—Part 1: General Requirements. International Electrotechnical Commission: Geneva, Switzerland, 2020.

  • 136.

    IEC 61980-2:2023; Electric Vehicle Wireless Power Transfer (WPT) Systems—Part 2: Communication and Activities. International Electrotechnical Commission: Geneva, Switzerland, 2023.

  • 137.

    IEC 61980-3:2022; Electric Vehicle Wireless Power Transfer (WPT) Systems—Part 3: Specific Requirements for MF-WPT Systems. International Electrotechnical Commission: Geneva, Switzerland, 2022.

  • 138.

    IEC PAS 61980-5:2024; Electric Vehicle Wireless Power Transfer (WPT) Systems—Part 5: Interoperability and Safety of Dynamic Wireless Power Transfer (D-WPT) for Electric Vehicles. International Electrotechnical Commission: Geneva, Switzerland, 2024.

  • 139.

    ISO 5474-4:2025; Electrically propelled road vehicles—Functional and safety requirements for power transfer between vehicle and external electric circuit—Part 4: Magnetic field wireless power transfer. ISO: Geneva, Switzerland, 2025.

  • 140.

    ISO 5474-6:2025, Electrically propelled road vehicles—Functional and safety requirements for power transfer between vehicle and external electric circuit Part 6: Safety and interoperability requirements for heavy-duty vehicles in magnetic field wireless power transfer. ISO: Geneva, Switzerland, 2025.

  • 141.

    ICNIRP. Guidelines for limiting exposure to time-varying electric and magnetic fields (1 Hz to 100 kHz). Health Physics 2010, 99, 818–836.

  • 142.

    IEEE C95.1-2019; IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz. IEEE: New York, NY, USA, 2019.

  • 143.

    ISO 15118-1:2019; Road vehicles—vehicle to grid communication interface. ISO: Geneva, Switzerland, 2019.

  • 144.

    Naseem, H.; Seok, J.K. Wireless Charging Technologies for Electric Vehicles: Topologies, Control Strategies, Challenges, and Future Trends. Energies 2026, 19, 3531. https://doi.org/10.3390/en19153531.

Share this article:
Download PDF
DOI
10.53941/perat.2026.100011
Issue
Online First
How to Cite
Agarwal (IEEE Fellow), V.; Bulkunde, U. S.; Praveen, G. Recent Advancements in Wireless Charging of Electric Vehicles. Power Electronics Research and Applications Transactions 2026. https://doi.org/10.53941/perat.2026.100011.
RIS
BibTex
Copyright & License
article copyright Image
Copyright (c) 2026 by the authors.
Article Metrics
73
Article Views
0
Citations