SIAMM/
Editorial Board

Editorial Board

  • Editor-in-Chief

    • Prof.  Abílio de Jesus

      Department of Mechanical Engineering, Faculty of Engineering, University of Porto, Porto, Portugal.

      Research Interests:
      fatigue; fracture; structural integrity; manufacturing processes; materials; machining; additive manufacturing.
      avatar img

  • Associate Editors

    • Prof.  Raj Das

      School of Engineering, RMIT University, Melbourne 3000, Australia.

      Research Interests:
      computational mechanics; finite element methods; multi-scale modelling; structural optimisation; composite materials; failure analysis; fracture mechanics; fatigue; impact mechanics; metamaterials; auxetic materials; FGM.
      avatar img

    • Prof. Dr.  Ricardo Branco

      Department of Mechanical Engineering, University of Coimbra, CEMMPRE, ARISE, Coimbra, 3030-788, Portugal.

      Research Interests:
      glass-fiber reinforced polymers; 3D printed polymers; fatigue of polymers; ageing effects.
      avatar img

    • Prof.  Raul Duarte Salgueiral Gomes Campilho

      Department of Mechanical Engineering, ISEP—School of Engineering, Polytechnic of Porto, R. Dr. António Bernardino de Almeida, 431, Porto, 4200-072, Portugal.

      Research Interests:
      numerical modeling; finite element methods; cohesive zone models for fracture behavior; adhesive joint design.
      avatar img

    • Prof.  Zhiping Xiong

      National Key Laboratory of Science and Technology on Materials under Shock and Impact, School of Materials Science and Engineering, Beijing Institute of Technology, No.5 Zhongguancun South Street, Haidian District, Beijing 100081, China.

      Research Interests:
      steel; high-entropy alloy; solid-state phase transformation; thermomechanical treatment; strengthening mechanism; toughening mechanism; precipitation; TRIP effect; high strain rate; electron microscope.
      avatar img

    • Prof.  B Sridhar Babu

      Department of Mechanical Engineering, Malla Reddy Engineering College, Hyderabad 500088, India.

      Research Interests:
      solid mechanics/contact mechanics; stress analysis; characterization of materials; manufacturing.
      avatar img

    • Dr.  Felipe Klein Fiorentin

      • 1. FEUP, Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal.
      • 2. INEGI, Institute of Science and Innovation in Mechanical and Industrial Engineering, 4200-465 Porto, Portugal.
      Research Interests:
      mechanical engineering; marine enginnering; fatigue;metallic additive manufacturing.
      avatar img

  • Editorial Board Members

    • Prof.  Jose C.M. Outeiro

      Center for Precision Metrology, Department of Mechanical Engineering and Engineering Science, University of North Carolina at Charlotte, Charlotte, 28223, NC, USA.

      Research Interests:
      surface integrity and its influence on the functional performance and lifespan of components; multi-physical/multi-scale modeling; simulation; and optimization of manufacturing processes; conventional and advanced machining processes; development of advanced manufacturing processes including hybrid processes; additive manufacturing; sustainable manufacturing; digital twin.
      avatar img

    • Assoc. Prof.  Francisco J. G. Silva

      Department of Mechanical Engineering, ISEP–School of Engineering, Polytechnic of Porto, Porto, Portugal.

      Research Interests:
      tribology; coatings; manufacturing processes.
      avatar img

    • Prof.  Ana R. Reis

      Faculty of Engineering of University of Porto (FEUP), FEUP campus, Rua Dr. Roberto Frias, 400, Porto, 4200-465, Portugal.

      Research Interests:
      additive manufacturing; materials processing.
      avatar img

    • Prof.  Tiago Emanuel Fraga Silva

      INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, INEGI, University of Porto, Rua Dr. Roberto Frias 400, Porto, 4200-465, Portugal.

      Research Interests:
      material manufacturing; mechanical engineering.
      avatar img

    • Prof.  Jose A.F.O. Correia

      CONSTRUCT-LESE, Faculty of Engineering, University of Porto, Porto, Portugal.

      Research Interests:
      fatigue; structural mechanics; fracture mechanics; steel structures.
      avatar img

    • Prof.  Rui F. Martins

      UNIDEMI, Department of Mechanical and Industrial Engineering, Nova School of Science and Technology, Universidade NOVA de Lisboa, Campus de Caparica, 2829-516 Caparica, Portugal.

      Research Interests:
      mechanical engineering; mechanical design; mechanical behaviour of materials; structural integrity; failure analysis; fatigue at room/high temperature; fracture mechanics; creep; finite element method; numerical simulations.
      avatar img

    • Dr.  Zbigniew Marciniak

      Department of Mechanics and Machine Design, Faculty of Mechanical Engineering, Opole University of Technology, Mikolajczyka 5, Opole, 45271, Poland.

      Research Interests:
      fatigue of materials; fracture mechanics; mechanical engineering; mechanical design; mechanical behaviour of materials; structural integrity; failure analysis.
      avatar img

    • Dr.  Marek Smaga

      Department of Mechanical and Process Engineering, Institute of Materials Science and Engineering, University of Kaiserslautern-Landau, Rhineland-Palatinate, Landau, Germany.

      Research Interests:
      metastability; microstructure; phase transformation; mechanical fatigue; functional fatigue; magneto-mechanical interaction; LCF; HCF; VHCF; MOKE; SEM; FIB; TEM; XRD.
      avatar img

    • Dr.  Jitendra Kumar Katiyar

      Centre of Research Impact and Outcome, Chitkara University Institute of Engineering and Technology, Chitkara University, Rajpura 140401, Punjab, India.

      Research Interests:
      tribology; corrosion; lubrication; composites;friction materials; surface coating; surface engineering; machining.
      avatar img

    • Dr.  T V K Gupta

      Department of Mechanical Engineering, Visvesvaraya National Institute of Technology, Nagpur-440 010,Maharashtra, India.

      Research Interests:
      hard material machining; metal additive manufacturing; laser materials processing.
      avatar img