Online First - 2026
Publications in Online First are peer-reviewed, accepted papers that are not yet assigned to volumes/issues, but have a DOl and are fully citable. Please note that the paper in Online First version will be removed and the final version will appear in the associated published online volumes/issues of the publication if the final version is assigned to volumes/issues.
Additive Manufacturing for Aerospace and Aeronautical Components Production: Current Status and Future Trends
Rúben D. F. S. Costa, Ricardo J. Gomes, Hedie H. Bernardi, Jorge T. Matsushima, Divani B. Gavinier
2026, doi: 10.53941/jmem.2026.100037
The Relationship between Tool Coatings and Process Parameters on Cutting Forces and Wear in High-Speed Machining
Naiara P. V. Sebbe, Andresa Baptista, Gustavo Pinto, Rúben D. Costa, Wenfeng Ding, Rafaela Barros Casais, Rita Sales-Contini
2026, doi: 10.53941/jmem.2026.100036
An Integrated Preventive Maintenance Transformation Framework Combining Lean Practices, Autonomous Maintenance and Digital Traceability
Rodrigo Lopes, Jorge Faria, Rafaela Casais, Isabel M. Pinto, André F. V. Pedroso
2026, doi: 10.53941/jmem.2026.100035
From Powder to Performance: Integrated Manufacturing and Post-Processing Strategies for Titanium Alloys
André F. V. Pedroso, Arnaldo G. Pinto, Ana Azevedo, Marisa Santos, Angelos P. Markoupolos, Marta L. S. Barbosa
2026, doi: 10.53941/jmem.2026.100034
Enhancing an Automatic Automotive Cable Assembly Line: A Design Science Research Approach to Improve OEE
Rodrigo Lopes, Raul D. S. G. Campilho, Arnaldo G. Pinto, Isabel M. Pinto, Marlene Brito, Alexandra Gavina, Isabel P. Figueiredo
2026, doi: 10.53941/jmem.2026.100033
Viability Analysis of Reusing Polymers in Additive Manufacturing
Manuel A. R. V. Esteves, Raul D. S. G. Campilho, Hamza Belkhanchi, Jai I. P. Singh
2026, doi: 10.53941/jmem.2026.100032
Mathematical Modelling of a Pneumo-Hydraulic Impulse Device for Vibration Turning
Roman Obertyukh, Andriiy Slabkyi, Oleksandr Povstyanoy, Dmytro Bakalets, Vladyslav Polishchuk
2026, doi: 10.53941/jmem.2026.100031
Meshless PINN-Based Modeling of Hot Forging Processes for Gas Turbine Engine Blade Manufacturing
Viktoriia Fedosieieva, Anton Matiukhin
2026, doi: 10.53941/jmem.2026.100030
Sustainable Machining in the Era of Industry 5.0: A Unified Review of Minimum Quantity Lubrication, Nanofluids, and Human-Centric Process Optimisation for Net-Zero Manufacturing
Ignatius Ekengwu, Dara Ezechi Jude
2026, doi: 10.53941/jmem.2026.100029
Suite 4002 Level 4, 447 Collins Street, Melbourne, Victoria 3000, Australia
General Inquiries: info@sciltp.com